No builder to hire
We build and install the building ourselves, so the steel needs no separate contractor.
Before you settle on a size, write down what the building has to protect: a boat, a tractor, a shop full of tools, a stack of firewood. That list is what custom metal buildings in Goose Creek, SC should be sized around, and it is where we start. The steel comes direct from our plant in Farmville, NC, where it is roll-formed, and we build and install the finished building ourselves, so no separate contractor is needed for the steel. Our delivery and installation area covers Berkeley County, Mount Pleasant, North Charleston, Summerville, Moncks Corner and Charleston.
Delivery costs nothing within 100 miles anywhere in Eastern NC, Eastern SC or Eastern VA. To see a footprint on the ground before you decide, visit the walk-in lots in Greenville, NC. To get a price, phone (252) 414-5105 or fill in the quote form; dollar figures are not posted on this site.
Call (252) 414-5105
Get a Free Quote
In Goose Creek and across Berkeley County, the company that makes your custom metal building also delivers it and puts it up. That leaves you no builder to find for the steel. Questions go to (252) 414-5105.
We quote garages, workshops, barns and carports, plus clear-span floor space for commercial use. Width, height and openings are priced against your pad and the requirements of your county, with the wind and humidity of the coastal plain in mind.
Manufacturing happens in Farmville, NC, and not in Greenville. If you want to look at samples first, the Greenville lots at 1046 Greenville Blvd SW take walk-in visitors, and afterwards we deliver to the Charleston corridor, Goose Creek included. East Carolina Outdoor Products can be found at that address, in Greenville, NC 27834, and the phone number is (252) 414-5105.
Nearby towns include Hanahan, Ladson, Mount Pleasant, North Charleston, Summerville, Moncks Corner and Charleston, along with other Eastern SC towns that fall inside our free delivery range. If you are weighing buildings for sale or kits, ask about rent-to-own too. Qualifying buildings carry no credit check.
The word custom gets used loosely, so test it with questions. Can the building be sized in small steps, or does it jump from one stock size to the next? Do the doors and windows land where you drive in and where you work? Is the engineering worked out for the county the building will stand in, or lifted from a catalog? A building worth calling custom should let you answer yes to all three.
That last question carries the most weight on this coast. Wind speeds used for design are higher near the water, and inspectors want certified drawings that carry the street address from the permit. Lean-tos are where custom saves money: leaving one side open for a boat, a tractor or firewood adds covered space for far less than a wider building would cost.
To get started, draw the lot on paper, show where the driveway runs and which way the weather comes in from, and list what will be stored. Bring the page to us, or try the 3D designer to lay it out first.
Walk the site before anything else and look at the ground. Sandy soil, where you have it, drains well but needs the right anchors, so describe what is under your feet when you ask for a quote. The next question is how high to set the pad. Many parcels near the coast sit in mapped flood zones, and pad height deserves more thought than colors or door sizes. Goose Creek itself lies in Berkeley County, north of Charleston and beside the Naval Weapons Station.
Then think about wind and water. Design wind speeds on this coast are among the highest for the region, so certification and anchoring come first, and building departments here expect certified drawings. Ask for them at the outset. Hugo in 1989 is still the benchmark people use, while Matthew and Florence showed that floodwater can do as much damage as wind: the Waccamaw River was still climbing days after Florence had moved on. In daily life it is salt air that wears on a building. Rinse the panels, keep the trim and fasteners in repair and choose a roof that sheds debris, and the steel should look right for decades.
Yes. We make the building at our Farmville, NC plant, then deliver and install it in Goose Creek and throughout Berkeley County. The number to call is (252) 414-5105.
Not for the steel building: we build and install it ourselves. Call (252) 414-5105 to talk it through.
In Farmville, NC. The Greenville location takes walk-in visitors and does no manufacturing.
That depends on the size, the options and the certification, and we do not post dollar figures online. Phone (252) 414-5105, or send the quote form.
Send us the size you have in mind, your county and what will go inside. We price from what steel costs today, there is no obligation, and if a different size would suit the job better we will say so.