Custom Metal Buildings Jacksonville, NC

ECOPM28

Jacksonville NC · Onslow County

The most useful fact about custom metal buildings in Jacksonville, NC is also the simplest: you do not need a second contractor for the steel building. We roll-form 29-gauge steel in Farmville, deliver it across Onslow County, from Jacksonville and Richlands to Swansboro and Sneads Ferry, and install it ourselves. Delivery is free inside 100 miles, and qualifying buildings are available on a rent-to-own basis, with no credit check involved.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No second contractor

The steel building is built and installed by us, with nobody else to hire for it.

Locations

Sized to your lot

Each quote is built around the site you own near Jacksonville, not taken from a one-size kit.

sun

Wind options for the coast

Certification and framing packages are available when Onslow County calls for them.

power 2

Plant and sales lots

The panels are roll-formed in Farmville. Our sales lots are in Greenville, at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Support

Call us

To start a quote, dial (252) 414-5105 and have your dimensions handy.

Diverse Product Range

Free within 100 miles

Delivery to Sneads Ferry, Swansboro, Richlands and Jacksonville carries no charge.

money_1

Rent-to-own available

On qualifying buildings, no credit check is needed.

Tan and brown metal garage with two roll-up doors

From steel to setup, one company

The company that makes your building also delivers it and puts it up, and that company is us. For the steel building itself, you do not have to find a builder or a contractor. Questions go to (252) 414-5105.

Red metal building with open bays on a wide concrete slab

Custom metal buildings in Jacksonville, sized to your parcel

Many of the sites that come up when you look for custom metal buildings in Jacksonville sell kits and never mention the wind near Camp Lejeune, the humidity, or what Onslow County requires for a permit. We lay out the bays, the openings and the certification around the parcel you own, and the finished building comes from the Farmville plant where its panels are cut.

Gray barn-style metal garage with two doors and side lean-tos

What you can change on a Jacksonville building

Width and length are set in standard increments, and the legs go up to 20′. The roof can be regular, A-frame or vertical. Framed openings take roll-up doors and walk-in doors, and you can add lean-tos, windows, wainscot and insulation packages suited to the heat of the coastal plain. Before you sign, we sort the structural options from the cosmetic ones.

White metal building with open bays, with a truck and equipment trailer nearby

Towns around Jacksonville we deliver to

Delivery and professional setup cost nothing inside 100 miles. That radius takes in Hubert, Sneads Ferry, Swansboro, Richlands and Jacksonville, along with most of Eastern NC. If your inspector wants engineered drawings, ask us for them. Call (252) 414-5105, or find our sales lots at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Tan metal garage with two roll-up doors and side lean-tos

Which parts of a custom building should be yours to change

Nearly every seller calls a steel building custom, so it is worth asking what the word covers. Can you pick the width and length in small steps, or only choose among three stock sizes? Is leg height your decision? Do the doors and windows follow your driveway and the way you work? And has someone worked out the framing and anchoring for your own county, or reused a drawing from a catalog?

The last of those questions carries the most weight near the coast. Buildings there are designed for stronger winds, and inspectors want certified drawings that show the same address as the permit. A lean-to is the other place where a custom order pays: one open bay down a side wall will cover a boat, a tractor or a stack of firewood for much less than it costs to widen the whole building.

Before you call, sketch your lot, show where the driveway runs and which way the weather usually arrives, and write down everything that will be stored inside. Bring the sketch to us, or play with the layout in the 3D designer beforehand.

Red metal garage with two roll-up doors and a carport lean-to

Building in Jacksonville: Camp Lejeune, wind and flood maps

Two local facts shape most building decisions in Jacksonville. The first is the military presence: with MCAS New River and Camp Lejeune here, many buyers are families who know orders may come. The second is salt water. The nearer a site is to the ocean or the sounds, the stronger the wind a building is designed to withstand, so certification, framing and anchoring that a site a hundred miles inland might treat as optional are often required here. Request certified drawings early, since Onslow County’s inspections office will want them and your insurer may too.

Florence is the storm most people here compare the rest with. In 2018 it brought days of rain and a surge that carried river water into streets that had never flooded. If the flood map puts your lot in a flood zone, the height of the pad and the anchoring matter as much as the building does, and close to the water a CAMA permit may be needed alongside the county’s.

Salt air does its damage slowly. Rinsing the panels a couple of times a year and touching up fasteners and trim should let the steel outlast most of what is parked inside it.

Specifications

  • Main office: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Primary phone: (252) 414-5105
  • Service area: Jacksonville · Onslow County · Camp Lejeune corridor
  • Nearby towns: Richlands, Swansboro, Sneads Ferry, Hubert
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Panels: 29-gauge standard, 26-gauge upgrade
  • Roof styles: Regular, A-frame boxed eave, vertical
  • Delivery: Free within 100 miles

Common Questions

Do I have to bring in my own builder to put up the steel building?

No. Manufacturing, delivery and setup of the steel building are all ours. Call (252) 414-5105 and we can go through it with you.

Where can I order a custom metal building near Jacksonville, NC?

From East Carolina Outdoor Products, reachable at (252) 414-5105. Our sales lots are at 1046 Greenville Blvd SW, Greenville, NC 27834, and orders are delivered and installed across Onslow County, from Jacksonville to Richlands and Swansboro.

Do you work with military families around Camp Lejeune?

Yes. Quoting steel buildings for Jacksonville and the Camp Lejeune corridor is regular work for us, covering storage, workshops and residential garages. Give us your dimensions when you phone (252) 414-5105.

Do I need engineered drawings for a building in Onslow County?

A permit is usually required for a permanent building on a foundation, and the wind rules along the coast can call for certified drawings. If your inspector asks for them, we provide them. Questions are welcome at (252) 414-5105.

Is delivery included when I buy a metal building near Jacksonville?

Yes. Inside 100 miles, both delivery and professional setup are free. That takes in Hubert, Sneads Ferry, Swansboro, Richlands and Jacksonville, as well as most of Eastern NC.

Is rent-to-own available in Jacksonville with no credit check?

Yes, on qualifying buildings; there is no credit check. For the current terms, phone (252) 414-5105.

A price for your lot, back in 24 hours

Send a rough size, the county the building will stand in and what has to fit inside. We figure the price from what steel costs right now, asking commits you to nothing, and if another size would suit the job better, we will tell you.

Request a Quote Design It in 3D