Custom Metal Buildings Portsmouth, VA

ECOPM28

Portsmouth VA · Southside · Shipyard / naval history · Midtown Tunnel corridor

Portsmouth is an independent city in Southside Hampton Roads, with deep roots in shipyard work and the navy, and it is separate from Norfolk across the water. We quote custom metal buildings in Portsmouth, VA for lots in and around the Midtown Tunnel corridor and for the neighborhoods that history shaped. We roll-form the 29-gauge steel in Farmville, NC, where our plant is, and our own crew puts each building up, so there is no separate contractor to hire for the steel.

Delivery costs nothing inside 100 miles of one of our lots. Portsmouth and the rest of Hampton Roads usually sit outside that distance, so call (252) 414-5105 and we will tell you plainly what delivery would cost. Our Greenville, NC lots are where we sell; the buildings themselves are made at the Farmville plant.

Call (252) 414-5105

Get a Free Quote
Relocated

We build and install

Our crew puts up the building after we make it, so no second contractor is needed for the steel.

Diverse Product Range

Southside, apart from Norfolk

The shipyard and naval neighborhoods of Portsmouth and the area around the Midtown Tunnel are a separate market from Norfolk.

power 2

Plant and sales lots

We form the steel in Farmville. To walk through framing samples, visit East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Support

Call for quotes

(252) 414-5105

delivery truck

Delivery to Portsmouth

Free within 100 miles of an ECOP lot. For Portsmouth we quote the freight, and yes, we deliver.

money_1

Rent-to-own terms

Buildings that qualify carry no credit check.

Quality Assurance

Certified drawings

Supplied when Portsmouth or a nearby Southside jurisdiction asks for them.

Steel frame of a metal building going up, with a lift on site

No builder to hire for the steel

We manufacture the building, deliver it and install it ourselves. Because erecting it is part of our work, you do not have to find a builder or a second contractor for the steel. Questions go to (252) 414-5105.

Dark green metal building with a roll-up door

Custom metal buildings around Portsmouth and the Midtown Tunnel

Across the water from Norfolk, Portsmouth has a naval and shipyard history of its own, while the Midtown Tunnel corridor links it toward Norfolk. We still treat it as Portsmouth, not as an extension of its neighbor. We quote every custom building from the Farmville plant, which means its length, bay layout and door positions, along with any certification, are set for your own lot in the Portsmouth area instead of being picked from a national catalog.

Gray metal garage with two open doors and a lean-to under trees

What you can change on a Portsmouth building

Start with size: widths and lengths move in standard increments, and legs rise as high as 20′. For the roof, pick a vertical, an A-frame or a regular style. From there, add whatever the job needs from lean-tos, wainscot, insulation, windows and framed openings. Garage, shop and residential buildings on the Southside are the usual jobs around the Midtown Tunnel corridor, in Portsmouth neighborhoods whose character comes from shipyard and naval history. Before you sign anything, we help you tell the structural choices from the purely cosmetic ones.

White metal building with open bays, with a truck and equipment trailer nearby

Delivery and contact for Southside Hampton Roads

You can reach us at (252) 414-5105, or visit East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834, and look over the framing samples on the lots there. After that we arrange for the building to leave the Farmville plant for Portsmouth and the rest of Southside Hampton Roads, Virginia. Delivery is free for sites within 100 miles of any ECOP lot. For Portsmouth and Hampton Roads the freight is quoted straight, and we do deliver and put the building up.

ECOPM53

What a custom metal building should let you decide

A custom building starts on paper, before anyone prices steel. Draw the lot, show where the driveway runs and which way the weather usually blows in from, and write down everything the building must hold. That one page tells you where the doors and windows belong and how wide, long and tall the building needs to be.

Then find out what the word custom really covers. Ask whether you can set the width, the length and the leg height in small steps, rather than being nudged toward the nearest stock size. The frame and its anchors should be engineered for your county, not borrowed from a catalog. Close to the water, design wind speeds climb, and an inspector will expect certified drawings with the same address as the permit.

A lean-to is the other place a custom design pays. Leaving one bay open along a side shelters the tractor, the boat or the firewood for much less than widening the whole building. Bring your sketch to us, or use the 3D designer to try a layout first.

White metal building with a lean-to over a concrete pad

Isabel, tidal water and siting a building in Portsmouth

In 2003 Isabel became the yardstick for storms across much of the region, and most winters a nor’easter does the same kind of damage more slowly. For a building in Portsmouth, the lesson is about siting and anchoring. Hampton Roads is low and flat with tidal water on every side, and flooding is not reserved for storms; it can happen under a clear sky. So work out pad height and drainage first, and settle the wind rating straight after.

A shipyard town on the Elizabeth River for over two centuries, Portsmouth has its own office for permits and inspections, as each city here does, and requirements can change at a city line. Ask before you order. Salt air drifts a long way inland over this much open water, which is why rinsing the panels and looking after the fasteners and trim is worth the effort.

Because many military families live in Portsmouth, we are often asked about rent-to-own and about how fast a building can be put up. It is worth raising both when you call.

Specifications

  • Main office: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Primary phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming (not Greenville)
  • Service area: Portsmouth VA · Southside Hampton Roads · Midtown Tunnel corridor
  • Nearby: Midtown Tunnel corridor, shipyard / naval district, Churchland, Western Branch edge
  • Widths: 12’–60′ clear span
  • Panels: 29-gauge standard, 26-gauge upgrade
  • Delivery: Free within 100 mi of any ECOP lot; Portsmouth quote on call

Common Questions

Will I have to hire a builder of my own for the steel?

No. Manufacturing, delivery and setup are all ours, so the steel building needs no builder of your own. Call (252) 414-5105.

Where can I buy a custom metal building near Portsmouth, VA?

We sell them. Our number is (252) 414-5105, and our main office is East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834. Farmville, NC is where we roll-form the steel, and from there it goes to Portsmouth and the rest of Southside Hampton Roads, Virginia, including the Midtown Tunnel corridor and the neighborhoods with shipyard history.

Are the buildings made at the Greenville location?

No. Farmville, NC is where they are manufactured, and the lots in Greenville exist to sell them.

Do I pay for delivery to Portsmouth?

Not when the site is within 100 miles of an ECOP lot, because delivery is free there. Portsmouth and the rest of Hampton Roads typically lie beyond that range, but we deliver from Farmville all the same and quote you the cost. Phone (252) 414-5105.

Will a building in Portsmouth or elsewhere on the Southside need engineered drawings?

A permit is generally needed for a permanent building set on a foundation; when your inspector wants certified drawings, ECOP supplies them. For details call (252) 414-5105.

Does ECOP offer rent-to-own without a credit check?

Yes, for buildings that qualify. Ask us at (252) 414-5105.

Your Portsmouth price within 24 hours

Send us the building size you are considering, the county or city it will stand in and what you plan to keep inside. We price from steel costs as they are today, you owe nothing for asking, and if another size would suit you better we will say so.

Request a Quote Design It in 3D