Made and installed by us
Manufacture and installation are both ours, which leaves no builder for you to hire for the steel.
Walterboro sits inland on I-95 in Colleton County and calls itself the front porch of the Lowcountry. It is on the Charleston corridor without being on the Charleston waterfront, and the lots here are shops, farms and corridor parcels rather than crowded waterfront ones. That is the setting for the custom metal buildings in Walterboro, SC that we quote: 29-gauge steel roll-formed at our plant in Farmville, NC, then sized and certified for your own lot.
ECOP both builds and installs, so the steel needs no separate contractor. Walterboro is typically farther than the 100 miles within which delivery is free from any ECOP lot, so call (252) 414-5105 and we will price the delivery plainly. The Greenville, NC location has sales lots only, and the plant is in Farmville.
Call (252) 414-5105
Get a Free Quote
Manufacture, delivery and setup are all ours. That leaves no builder or contractor for you to hire for the steel building itself. Call (252) 414-5105 with any question.
Around Walterboro the lots are shops, farms and parcels along the I-95 corridor, with none of the density of the Charleston waterfront. We quote custom metal buildings from the Farmville plant, and each one is laid out for the lot you own: its length, its bays, where the doors go and what certification the site needs. None of it comes from a national catalog.
Garages, shops and inland Lowcountry packages are common orders around Colleton County, along I-95 and the Charleston corridor. From there you set the dimensions in standard increments, with legs as tall as 20′, and choose a regular, A-frame or vertical roof. Framed openings, windows, wainscot, lean-tos and insulation are the other options, and before you sign we separate the structural ones from the cosmetic ones.
Call (252) 414-5105, or visit East Carolina Outdoor Products at 1046 Greenville Blvd SW in Greenville, NC 27834, where framing samples can be looked over before delivery is scheduled. The building travels from the Farmville plant to Walterboro and the inland Lowcountry of Colleton County, South Carolina. Delivery is free within 100 miles of any ECOP lot, Walterboro freight is quoted plainly, and the building is still delivered and installed by us.
A good place to start is a drawing on paper. Show your lot, the point where the driveway meets it and the direction the weather usually arrives from, then write out everything the building has to hold. That page, rather than a stock model, ought to shape a custom metal building.
Next, ask what you are allowed to change. Leg height, width and length ought to adjust in small increments, and openings should be placed to suit your driveway and your daily work. Lean-tos show the value of custom most clearly, since a single open bay down one wall can cover a boat, a tractor or the firewood at a fraction of the cost of a wider building.
Then ask how the frame and anchors are engineered. They should be worked out for Colleton County, not borrowed from a catalog. Toward the coast, where design wind speeds climb, inspectors look for certified drawings carrying the permit’s address. Bring your sketch to us, or test a layout on your own in the 3D designer.
What is under the pad comes first. Sandy ground lets water through quickly, which helps, but the anchors have to be chosen for it, so tell us what you are standing on when you request a quote. Next, find out where water gathers after a downpour; many lots along this stretch of coast are inside mapped flood zones, and the pad height should reflect that. Pad height, anchoring and certification all deserve a look before colors or door sizes come up.
Walterboro likes to call itself the Lowcountry’s front porch, and it stands beside I-95 in Colleton County. Storms here are still compared with Hugo in 1989, and Matthew and Florence later showed that floodwater can damage a building as badly as wind. Wind speeds used for design along this coast are among the highest anywhere in the region, and the departments that issue permits tend to want certified drawings, so ask us for those from the start.
Salt in the air is the slow, daily wear on steel. A regular rinse of the panels, touch-ups on trim and fasteners, and a roof style that does not hold debris will keep the building looking as it should for decades.
No. The building is made, delivered and set up by us, which leaves no separate builder for the steel. Call (252) 414-5105.
From East Carolina Outdoor Products at (252) 414-5105. We roll-form the steel in Farmville, NC and deliver to Walterboro and the rest of Colleton County, in South Carolina’s inland Lowcountry along I-95 and the Charleston corridor. The main office is at 1046 Greenville Blvd SW in Greenville, NC 27834.
No. Farmville, NC is the plant, and Greenville has sales lots only. Call (252) 414-5105.
Delivery is free within 100 miles of any ECOP lot, and Walterboro and the inland Lowcountry typically fall outside that distance. We still deliver from Farmville; call (252) 414-5105 and we will quote it.
A permit is normally required for a permanent building on a foundation. We can provide certified drawings for the inspector if they are requested. Call (252) 414-5105.
Yes, as long as the building qualifies. Call us at (252) 414-5105 and ask.
Give us the size you are thinking of, the county and what will be kept inside. The figure we return follows current steel prices and does not obligate you, and if another size makes more sense for what you store, we will mention it.