Custom Metal Buildings Wilmington, NC

ECOPM28

Wilmington NC · New Hanover County · Cape Fear

Two decisions shape custom metal buildings for Wilmington, NC: how large to make the building, and how much wind rating the site calls for. Send us the parcel address and a note of what the building will hold, and we can settle both. We roll-form 29-gauge steel at our Farmville plant and deliver it along the Cape Fear and through New Hanover County, to Porters Neck, Castle Hayne, Leland, Carolina Beach, Wrightsville Beach and Wilmington itself, and we erect it ourselves, so the steel needs no separate contractor. Delivery costs nothing within 100 miles, and on qualifying buildings you can rent to own without a credit check.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

One company, no second builder

Making, delivering and erecting the building are all ECOP’s work, so no other contractor handles the steel.

Diverse Product Range

Written for your parcel

Each quote is built around the property you own in the Wilmington area, with coastal wind in mind.

sun

Wind and salt-air packages

Framing and certification packages are offered whenever New Hanover County asks for them.

power 2

Farmville plant, Greenville lots

Panels are formed in Farmville. East Carolina Outdoor Products sells from 1046 Greenville Blvd SW, Greenville, NC 27834.

Support

Phone for a quote

Dial (252) 414-5105.

delivery truck

No delivery charge

Free within 100 miles, which takes in Porters Neck, Castle Hayne, Leland, Carolina Beach, Wrightsville Beach and Wilmington.

money_1

Rent-to-own option

Qualifying buildings need no credit check.

Quality Assurance

Certified drawings

Available if the New Hanover County inspections office, or another one nearby, wants them.

Steel frame of a metal building going up, with a lift on site

Built and installed by the same company

Forming, delivering and installing are one job at ECOP. For the steel itself you will not need to hire anyone else, whether a builder or a contractor. Call (252) 414-5105.

Red metal building with open bays on a wide concrete slab

Custom metal buildings for Wilmington: wind, salt air, no catalog kit

Wilmington lies along the Cape Fear River in New Hanover County, and a building there faces coastal wind and salt air that sellers working inland never quote. A national catalog is not set up for that. It leaves out hurricane-season framing, certified drawings for your inspector and the variety of parcels between Porters Neck and Carolina Beach. We lay out the bays, doors and wind options for your own site and build the panels at the Farmville plant, whether the lot is close to Wrightsville Beach, inland near Castle Hayne or over the river in Leland.

Gray barn-style metal garage with two doors and side lean-tos

Options you can choose near Wilmington

Width and length move in standard increments, and the legs can reach 20′. You can choose a regular, A-frame or vertical roof, add lean-tos or insulation, which earns its place in humid coastal summers, and have framed openings cut for roll-up doors, walk-in doors and windows. Wainscot is available too. Boat, RV, shop and contractor-yard buildings are common along US 17 and I-40. Before you sign we sort out which choices affect the structure and which are cosmetic. Our price is the installed price, so anyone comparing kits or for-sale listings sees what delivery and setup add.

White metal building with open bays, with a truck and equipment trailer nearby

Delivery around Wilmington and the Cape Fear corridor

Phone (252) 414-5105, or stop by the Greenville lots to look at framing samples. After that we schedule delivery, which costs nothing within 100 miles and covers Wilmington and most of the Cape Fear corridor across New Hanover, Brunswick and Pender counties.

Tan metal garage with two roll-up doors and side lean-tos

What custom should mean for a Wilmington metal building

A seller can call any building custom. What counts is how much of it you can still change. Size should move in small steps instead of leaping between three stock models, so width, length and leg height can match what you actually own. Door and window openings belong wherever your driveway and your daily work put them. The structure matters as well: framing and anchoring ought to be worked out for your county, not lifted from a catalog.

In Wilmington that last item carries weight, because the coast brings stronger design winds and the inspector will look for certified drawings that carry your permit’s address. A lean-to is the other smart custom choice. Leaving one side bay open for a tractor, a boat or the firewood adds far less cost than widening the entire building.

A good starting point is a sketch: the lot, the driveway, the side the weather arrives from and a list of what goes inside. Bring it to us, or play with the 3D designer before you call.

Red metal garage with two roll-up doors and a carport lean-to

Florence, flood maps and anchoring in Wilmington

Wilmington is a port on the Cape Fear River, and storm talk here begins with Florence, which made landfall just east of the city, at Wrightsville Beach, in 2018. Days of rain were followed by a surge that sent river water into neighborhoods that had stayed dry before. So look at the flood map before you commit to a spot. If the parcel is mapped as a flood zone, put as much thought into the pad’s height and the anchoring as into the building, and close to the water a CAMA permit may be required on top of the county’s.

Wind is the other half. The wind a building must be designed for grows stronger the closer you get to the ocean and the sounds, which is why framing, anchoring and certification can be required here that a site a hundred miles inland could skip. Order the certified drawings early. The New Hanover County inspections office will ask for them, and your insurer might too. Salt air works more slowly: wash it off the panels once or twice a year, touch up the fasteners and trim, and the steel should outlast whatever is parked under it.

Specifications

  • Main office: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Primary phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Service area: Wilmington · New Hanover County · Cape Fear corridor
  • Nearby: Wrightsville Beach, Carolina Beach, Leland, Castle Hayne, Porters Neck
  • Widths: 12′ – 60′ clear span
  • Panels: 29-gauge standard, 26-gauge upgrade
  • Delivery: Free within 100 miles

Common Questions

Does ECOP put the building up, or do I hire someone for that?

We put it up. ECOP makes the steel, delivers it and does the erecting, so the steel building needs no other contractor. Our number is (252) 414-5105.

Where do I go to buy a custom metal building in Wilmington, NC?

Talk to East Carolina Outdoor Products at (252) 414-5105. The panels are formed in Farmville, and the buildings go out to New Hanover County and the rest of the Cape Fear corridor. The main office is at 1046 Greenville Blvd SW in Greenville.

Is coastal wind or salt air taken into account near Wilmington?

Yes. Along the Cape Fear and in New Hanover County, buildings often need wind-rated options, and the detailing has to cope with salt air. Give us the parcel address and we will price the package that fits. Phone (252) 414-5105.

Are engineered drawings required in New Hanover County?

For a permanent building they often are, particularly close to the coast or along the commercial US 17 and I-40 corridors. Certified drawings come from us whenever your inspector asks. Phone (252) 414-5105.

Does free delivery reach Wilmington, Wrightsville Beach, Leland and Carolina Beach?

Yes, anywhere within 100 miles, which also takes in Castle Hayne, Porters Neck and most of Eastern NC.

Is rent-to-own possible without a credit check, and should I buy a kit instead?

Qualifying buildings can be rented to own, and no credit check is needed. We will also go through kit pricing against installed pricing, so you know what the ‘for sale near me’ quotes include. Ask ECOP at (252) 414-5105.

A number you can plan around, within 24 hours

Give us the size, the county and what the building will hold, and we will price it at today’s steel cost. Asking puts you under no obligation, and should another size fit the job better, you will hear that from us.

Request a Quote Design It in 3D