Metal Barns

ECOPM52

Ag · Barn Buildings

Old wooden tobacco barns still lean in fields from Wilson to the coast, and steel is what took their place. Metal barns give you a wide clear span with no interior posts, which suits farm shops, hay storage, equipment and shelter for livestock. We manufacture our steel barn buildings in Farmville and install them from the Greenville lot, and tall doors, lean-tos and open sides can all be configured as custom metal buildings. Nobody else has to be hired: we put the barn up ourselves.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No separate builder

We build the barn and install it ourselves, so the steel needs no outside contractor.

Support

Our phone number

Call us at (252) 414-5105.

Locations

Our address

East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

power 2

Made in Farmville

The plant itself is in Farmville, NC; nothing is manufactured at the Greenville lot.

Diverse Product Range

What we make

Steel barns, which many people call metal barns.

Shed

Not wood pole barns

We do not act as a general contractor for wood pole barns.

Diverse Product Range

Built to your layout

Tall doors, lean-tos and open sides are all available.

Long white metal barn with arched openings, seen from the front

Who builds the barn: we do

We make the barn, bring it to your site and put it up. You do not have to line up anyone else for the steel itself; the build and the setup are both ours.

ECOPM18

What metal barns do on Eastern NC farms

Growers of tobacco and row crops keep their implements under cover. Horse and cattle operations ask for run-in lean-tos. A mixed farm tends to put feed, equipment and a shop bay under one roof. Narrower needs, such as a horse barn or an agricultural building, have their own pages; this one is about metal barns in general.

White metal building with open bays, with a truck and trailer alongside

Steel barn or wood pole barn?

Many people who type “barns” into a search box are picturing wood posts. We do something different: we manufacture and install steel buildings, and we do not act as a general contractor for wood pole barns. Being plain about that keeps our quotes and your expectations accurate.

White barn-style metal building with black trim and lean-tos

See it in Greenville, built in Farmville

Phone (252) 414-5105, or visit East Carolina Outdoor Products at 1046 Greenville Blvd SW, Greenville, NC 27834. The plant is in Farmville, NC. Greenville is the sales lot and nothing more. Any site up to 100 miles from an ECOP lot gets delivery and setup free.

White and gray metal building with three large openings

Sizing a metal barn around the machinery inside

Equipment drives farm life in this part of the state, and most of it costs too much to leave outdoors: planters and sprayers, diggers and pickers, plus the trucks. The usual remedy is a clear-span steel barn. Without posts inside there is nothing to maneuver around, and the doors can be cut as wide as the biggest implement.

Size the barn for your largest machine, and leave room for the next purchase. The door is the dimension people regret most: a header, or a folded planter, needs a bigger opening than the tractor pulling it. Along one side, a lean-to is a low-cost way to roof hay, wagons and other equipment that need no walls.

Animals are a different case. Here, moving air does more for livestock and horses than insulation does, so face the barn into the summer breeze, fit ridge vents or leave the gables open, and choose a light roof to take some of the heat out of July and August.

Gray metal barn with a wraparound lean-to porch

Steel barns where tobacco barns used to stand

Tobacco was cured in tall, narrow barns, and for roughly a century those barns served as the outbuildings of farms across Eastern North Carolina. Steel took over, in backyards as well as on farms, with wide spans free of posts and a roof that sheds a summer thunderstorm.

These days the same footprint might shelter a camper, a deer-season side-by-side, a bay boat used on the Pamlico, or the machinery for a peanut or sweet potato harvest. Let the longest thing you own set the length, allow a walkway around it, and add a bay. The regret customers mention most often is building too small.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC (not Greenville)
  • Address: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Product: Metal barn building
  • Widths: 12’–60′ clear-span
  • Delivery: Free within 100 miles

Common Questions

Does an ECOP metal building need a separate builder?

No. ECOP does the manufacturing, delivery and setup of the steel building, so there is no builder to hire. Call (252) 414-5105.

Is the manufacturing done at your Greenville lot?

No. The plant is in Farmville, NC, and the Greenville lots are for sales only. Call (252) 414-5105.

Do you also build wood pole barns?

No. Steel barn buildings are what we manufacture and put up. If you are weighing the two, our pole barn contractors page explains where we fit.

Can a metal barn have open sides?

Yes. A barn can be open along its sides, and a lean-to is a common addition. Call (252) 414-5105 to talk through the layout.

Will I need to find a contractor to put up a metal barn?

Not for the steel. We build the barn and install it ourselves.

Where do you manufacture your metal barns?

In Farmville, NC. You can visit our lot at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

A real number within 24 hours

A quote needs three facts: the barn’s size, your county and what it must hold. Our number follows steel prices as they are today, and you owe nothing for it. We will suggest a different size if it would serve you better.

Request a Quote Design It in 3D