Metal Building Kits Greenville, NC

Gray metal building with a tall roll-up door

Greenville NC Lot · Farmville Plant

You can verify three things about our metal building kits in Greenville, NC before you spend anything: the plant, the lot and the quote. The plant is in Farmville, where the panels are roll-formed. The lot, at 1046 Greenville Blvd SW, takes walk-ins, so a finished building is there to inspect. The quote is a phone call away, because we post no dollar figures online. Behind all three is steel made for the wind and damp air of the coastal plain, not a Midwest kit shipped in and left sitting on Pitt County clay. Take the kit alone, or have us erect it; with erection included, there is no builder to hire for the steel. Delivery is free within 100 miles across Eastern NC, Eastern SC and Eastern VA. Call (252) 414-5105.

Call (252) 414-5105

Get a Free Quote
power 2

From plant to pad

We manufacture, deliver and erect the steel shell, with no builder in between.

power 2

Farmville is the plant

Roll-forming happens there, never in Greenville.

Quality Assurance

Inspect one in Greenville

The walk-in lot sits at 1046 Greenville Blvd SW.

Support

Questions or a quote

Phone (252) 414-5105.

Relocated

Kit only, or installed

Take just the materials, or have ECOP put the whole building up.

delivery truck

Delivery at no charge

No charge for delivery inside 100 miles.

money_1

Rent-to-own terms

No credit check is run on qualifying buildings.

Steel frame of a metal building going up, with a lift on site

Your crew or ours

A kit can come as materials only, for a crew that knows the work. If you would rather not do it yourself, ECOP supplies and erects the building, and with supply-and-erect there is no separate builder to find for the steel. Call (252) 414-5105 to talk it over.

Tan metal garage with a roll-up door and side carport

Metal building kits rolled from coil at our plant

The coil comes into Farmville, and from it we roll the panels and cut the framing, sized for the humidity and wind of Eastern NC. Greenville is only the sales lot; nothing is made there. That is the line between a kit supplier with a plant and a national catalog that drop-ships.

Aerial view of the East Carolina Outdoor Products sales lot in Greenville

Check the gauge and the doors in person

At our Greenville lot, 1046 Greenville Blvd SW, you can examine the steel gauge, the roof styles and the door packages before you decide. Reach us at (252) 414-5105. The full address is East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Gray metal garage with a carport lean-to on a concrete pad

Towns we serve around Greenville every day

The daily route covers Winterville, Ayden, Farmville, Grimesland, Bethel, Wilson, Rocky Mount and Kinston, plus any other Eastern NC town within the free-delivery distance. If you are looking for a building for sale, or for rent-to-own, ask us: qualifying buildings carry no credit check.

Long charcoal metal building with a roll-up door on a freshly graded site

Is a metal building kit worth building yourself in Greenville?

A kit can save money for owners who can spare the hours, line up some help and already own the tools. Then there is the site. A steel frame has to go up square and level, and soft or sandy ground, or a slope, makes that hard. Owner-built frames most often go wrong right there, and a frame that starts crooked costs you effort on every panel that follows.

Anchoring decides the rest. Which anchor suits the building depends on the surface under it, whether concrete, asphalt or bare soil, and on the loads Pitt County requires. When a permit applies, the inspector checks the finished building against the certified drawings, anchors and all.

Having us install it takes that risk off your hands, and your weekend goes to using the building.

White metal garage with three roll-up doors

Greenville permits, flood maps and what to ask the county

Before the pad, make two quick inquiries. Ask the county whether a building your size needs a permit and what the inspector will want to see. Then open the county flood map and find your lot on it, above all if a creek or the river is close by. Five minutes spent there can head off an insurance problem down the road.

Then look at the ground. This part of Pitt County is sandy loam laid over clay, with the water table nearer the surface than most newcomers guess. Sweet potatoes and tobacco do well in it; a slab poured in a low corner of the yard does not. After a hard summer thunderstorm, watch where the water stays and keep the building off that spot.

Greenville grew up on the Tar River. Floyd in 1999 pushed it far past its banks, and after Matthew in 2016 the Tar and the Neuse again stayed out of their banks for days; both storms reached this far inland as rain. For most Pitt County lots, drainage, a pad that sheds water and anchors chosen for the soil take priority over wind.

Specifications

  • Plant: Farmville, NC — roll-forming manufacturer
  • Walk-in lot: 1046 Greenville Blvd SW
  • Address: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Phone: (252) 414-5105
  • Panels: 29-gauge standard, 26-gauge upgrade
  • Widths: 12’–60′ clear span
  • Delivery: Free within 100 miles
  • Region: Eastern NC · Eastern SC · Eastern VA

Common Questions

Who sells metal building kits in Greenville, NC?

East Carolina Outdoor Products. We roll-form the panels at Farmville, show buildings on the Greenville lot, and can supply the kit alone or install it as well. Call (252) 414-5105.

If I buy a kit, will I still need to hire a builder?

A materials-only kit assumes your own crew. With supply-and-erect, ECOP builds and installs the steel building, so no builder is required. Call (252) 414-5105.

Where is the plant that makes your kits?

In Farmville, NC. Greenville has a walk-in sales lot only, with no manufacturing.

How much do metal building kits cost in Greenville?

Size, options and installation all change the price, and we do not publish dollar figures. Call (252) 414-5105 or use the quote form.

A real number inside 24 hours

Send the size, the county and what will be stored. We price from steel costs as they stand today, you are under no obligation, and if another size would serve you better we will say so.

Request a Quote Design It in 3D