Metal Building Prices Edenton, NC — Chowan County / Albemarle

Tan metal garage with lean-tos on both sides

Edenton NC Metal Building Prices

The most useful thing to know about metal building prices for Edenton, NC is that there is no price list to look up. We work out each quote from the actual coil, framing and installation your building needs in Chowan County, so the quickest way to a figure is to phone (252) 414-5105. We form the steel at our Farmville plant, while Greenville has a sales lot where you can walk in and see displays. You do not need to line up a builder, because we build and install the building ourselves. This page gives no dollar amounts, since any we printed would be invented; it explains instead what moves a quote around Edenton and the Albemarle Sound.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No builder needed

We build and install the building ourselves, so you hire no one for the steel.

Support

Quoted, not listed

Phone (252) 414-5105 for a figure based on your site. We do not post dollar amounts that we have invented.

money_1

What sets the price

Dimensions, wall height, roof type, door choices, certification and the delivery and installation scope all feed into the figure.

power 2

Panels from Farmville

Our 29-gauge steel panels come off the roll-forming line at the plant in Farmville, NC.

Locations

Greenville sales lot

Walk in and see displays at 1046 Greenville Blvd SW, Greenville, NC 27834.

Regional Focus

Chowan County and nearby

Edenton is covered, and so are Elizabeth City, Plymouth, Windsor and Hertford.

delivery truck

Free delivery radius

Setup and delivery cost nothing at qualifying sites within 100 miles.

money_1

Rent-to-own

Ask when you call: qualifying buildings come with no credit check.

Steel frame of a metal building going up, with a lift on site

No builder to hire in Edenton

A building for Edenton starts at our plant and ends on your property, and we handle every step in between: manufacture, delivery and setup. No builder or contractor of your own is needed for the steel. Questions go to (252) 414-5105.

ECOPM30

What shapes metal building prices in Edenton and Chowan County

Edenton sits beside the Albemarle Sound in Chowan County, and that setting shapes what a building there needs. Parcels in the historic district may have setbacks to respect, humidity comes off the Sound, and many properties run out toward Hertford and Windsor. Quotes come out of the Farmville plant, and the Greenville lots are there for you to see samples. We regularly serve Elizabeth City, Plymouth, Windsor and Hertford as well.

Tan three-door metal garage at the end of a concrete driveway

What actually moves the price, without made-up dollar amounts

Several things move an Edenton quote. Width and length come first, and clear spans reach up to 60′. Wall height comes next, since more height, including headroom for an RV, takes more framing. After that comes the roof: regular, an A-frame with boxed eaves, or vertical panels, which carry water off. Doors and openings add to the total, whether they are roll-up doors, walk-in doors or framed bays. Certification matters when Chowan County asks for engineered drawings. Most Eastern NC sites fall inside the 100 miles for which delivery and installation are free. In Edenton these points weigh most: the permit and certification rules of Chowan County, a roof style that copes with rain blown off the Sound, the clear spans that shops and barns need, and whether the site sits inside the free delivery radius, as most Albemarle-area sites do. We will not invent a dollar amount on this page, so for a real figure on your footprint, phone (252) 414-5105.

White metal garage with black trim and two roll-up doors

From the Farmville plant to Edenton

The panels are formed at the Farmville plant and delivered to Chowan County. In Greenville, the sales lot welcomes walk-in visitors, so you can look at framing samples before you schedule delivery to Edenton, Hertford, Windsor, Plymouth or Elizabeth City. The phone number is (252) 414-5105, and the address is East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Gray metal building with a tall roll-up door

Same size, different price: what shapes a metal building quote in Edenton

Why would two buildings of the same size be quoted so differently? Mostly because of where they stand. Wind is the first factor: every county has a design wind speed, which sets how the building is framed and anchored and whether the inspector will insist on certified drawings. The speed goes up as you approach the coast. The second factor is the ground. A flat lot that drains well needs almost no preparation, but on low ground the pad may have to be built higher, with fill and regrading.

Then there are your own choices: doors (how many and how big), roof style, leg height, insulation and, if you want one, a concrete slab. Doors and wall height add to a quote more quickly than floor area does. Steel prices drift up and down through the year, which is why a posted chart goes stale within a month. We quote from current numbers.

Ahead of a call, collect three details: where the building will stand, roughly how big it should be, and what it will hold. With those, we can give you a firm number quickly.

Gray metal garage with a carport lean-to on a concrete pad

Building near the Albemarle Sound: ground, pad and flood map

Soil comes first. Around Edenton it runs from sandy ridges to black, organic ground that behaves like a sponge, and that range is why pad preparation matters here more than at almost any other place we deliver. Build the pad up, compact it, and grade it so water drains away.

Water defines this whole corner of the state: the Albemarle and Pamlico sounds, the Chowan, Roanoke, Pasquotank and Pamlico rivers, and flat farmland between them. Edenton itself, North Carolina’s first colonial capital, is on the bay where the Chowan River meets the Albemarle Sound. Storms here often come as water pushed by wind. Isabel in 2003 and Irene in 2011 forced the sounds across yards and fields well inland, so look up your parcel on the flood map. If it is near the shoreline, a call to the county will settle whether it needs a CAMA permit; most counties around the sounds come under the state’s coastal management rules. The flat, open country brings an advantage as well, which is space, and peanut, cotton and soybean farms here have used wide clear-span steel buildings for decades.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: Chowan County
  • Nearby: Hertford, Windsor, Plymouth, and Elizabeth City
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Roof styles: Regular, A-frame boxed eave, vertical
  • Delivery: Free within 100 miles (qualifying)

Common Questions

What should I expect a metal building to cost in Edenton, NC?

The figure depends on the size, the height, the roof, the doors, whether certification is needed, and what delivery and installation involve at your site in Chowan County. Give us your footprint when you phone (252) 414-5105 and we will quote you.

Do I have to hire my own builder for the steel?

No. The steel building needs no builder because we do the manufacturing, delivery and setup. Phone (252) 414-5105.

Where is the steel for an Edenton order made?

It is made at our plant in Farmville, NC. Greenville has a sales lot that takes walk-in visitors but no roll-forming line.

Which factors change a metal building price most in Chowan County?

Mainly the width and length, the leg height, the roof style, the door packages, and whether Chowan County wants certified drawings. Most sites near Edenton fall inside the 100 miles of free delivery.

Do you quote buildings for sites near Hertford?

Yes, and a call to (252) 414-5105 is all it takes. Our deliveries from the Farmville plant regularly reach Elizabeth City, Plymouth, Windsor and Hertford.

An Edenton price within 24 hours

Send us the building’s dimensions, the county and what it will hold. The quote is based on what steel costs now. Asking commits you to nothing, and if a different size would do the job better we will tell you.

Request a Quote Design It in 3D