Metal Building Prices Havelock, NC — Craven County / Cherry Point

White metal building with a lean-to over a concrete pad

Havelock NC Metal Building Prices

Havelock is a Marine Corps town in Craven County, home to MCAS Cherry Point, set between the Neuse River and the Croatan National Forest. With salt water that near, metal building prices here cannot be lifted from a national list. We work each one up from the coil, framing and installation your own site needs, and we post no dollar amounts we have invented. A real quote starts with a call to (252) 414-5105.

Our Farmville plant forms the steel. The sales lot in Greenville is open to walk-in customers, but nothing is made there. We also put the building up, so you do not hire a separate builder.

Call (252) 414-5105

Get a Free Quote
Relocated

Build and install, all ours

We put the steel building up ourselves, so nobody else needs hiring.

money_1

Quotes, not price charts

Phone (252) 414-5105 for a price worked out on your building. We print no made-up figures.

money_1

What moves the price

How big and how tall the building is, its roof, its doors, whether certification is needed, and delivery plus installation.

power 2

Rolled in Farmville

Panels in 29-gauge steel come off our roll-forming line in Farmville, NC.

Locations

Walk-in lot in Greenville

East Carolina Outdoor Products sells from a lot at 1046 Greenville Blvd SW in Greenville, NC 27834, where displays can be seen.

Regional Focus

Craven County and nearby

We quote buildings in Bridgeton, Newport, Morehead City and New Bern as well as Havelock itself.

delivery truck

Delivery within 100 miles

At qualifying sites, delivery and setup cost nothing when the building is within 100 miles.

money_1

Rent-to-own available

Buildings that qualify can be rent-to-own without a credit check. Ask about it on your call.

ECOPM28

Nobody else to hire for the steel

Making the building, hauling it and erecting it are all done by us. You never have to bring in a builder or contractor for the steel. Call (252) 414-5105.

Gray barn-style metal garage with two doors and side lean-tos

What Havelock metal building prices reflect in Craven County

Prices in Havelock follow Craven County permitting and the Cherry Point corridor, which means humid coastal-plain air, a choice of wind options, and parcels that run from New Bern out toward the Crystal Coast. We quote from the Farmville plant; Greenville is a sales lot only. Bridgeton, Newport, Morehead City and New Bern are the nearby towns we serve most often.

Red metal building with open bays on a wide concrete slab

What moves a Havelock quote, and why we post no dollar amounts

Six things set a building’s price. Width and length come first; clear spans run up to 60′. Height follows, since tall walls and RV clearance take more framing. The roof is next: vertical panels, which shed water, a regular roof, or the A-frame boxed eave style. Then come doors and openings, in the form of walk-in doors, roll-up doors or framed bays. Certification means engineered drawings, and Craven County can ask for them. Delivery and installation come last and are free within 100 miles at most Eastern NC sites.

A boat or truck that needs wide clear-span space, equipment that needs height, a longer building that needs an upgraded roof, and a county that wants certification: those are what separate one Havelock quote from another, and together they count for more than any national price sheet could show. We will not make up a dollar amount for this page. For a real figure on your footprint, call (252) 414-5105.

Dark green metal building with a roll-up door

From the Farmville line to a Havelock lot

Panels are roll-formed in Farmville. If it helps to see framing samples, the Greenville lot takes walk-in visitors at 1046 Greenville Blvd SW, and our number is (252) 414-5105. When you have decided, we arrange delivery to Havelock, Bridgeton, Newport, Morehead City or New Bern.

Tan metal garage with two doors and an open lean-to

Why two Havelock buildings of the same size get different quotes

You can set two buildings of identical footprint side by side and still see very different quotes, because the lot decides a good deal. Start with the county’s design wind speed. It governs the framing and the anchoring, it settles whether certified drawings are required, and it goes up the nearer you are to the coast. Then there is the site itself. Level, well-drained ground asks for almost nothing; ground that sits low may call for fill, grading or a raised pad before anything is built.

The rest is your call: roof style, leg height, how many doors and how big, insulation, and a concrete slab if you want one. Doors and wall height raise a quote faster than extra floor area does. Steel also changes price during the year, so rather than post a chart that would be a month out of date, we quote from what steel costs now.

Bring three details to the call: where the building will go, roughly how big it should be and what it will hold. With those, we can price it quickly.

ECOPM35

Florence, flood zones and anchoring a building in Havelock

Ask around Havelock which storm people measure the others by and most will say Florence, in 2018: days of rain, then a surge that drove rivers into neighborhoods with no history of flooding. For a building, the lesson is about siting and anchoring. A lot inside a mapped flood zone needs the pad’s height and the anchoring treated as seriously as the steel above them, and lots near the shoreline may also need a CAMA permit, separate from the county’s.

Because Havelock sits so near salt water, the wind a building must be designed for is higher here than inland. Requirements that an inland county can treat as optional, such as the framing, the anchoring and the certification, are often mandatory in Craven County. Ask for certified drawings at the start: the inspections office will want them, and your insurer may too.

Salt air does its damage slowly. Rinse the panels off twice a year and keep fasteners and trim touched up, and the building should outlast most of what you park in it.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: Craven County
  • Nearby: New Bern, Morehead City, Newport, and Bridgeton
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Roof styles: Regular, A-frame boxed eave, vertical
  • Delivery: Free within 100 miles (qualifying)

Common Questions

How do you work out the price of a metal building in Havelock?

From the building’s size and height, its roof style and doors, any certification needed, and delivery and installation at your Craven County site. Give us your footprint at (252) 414-5105 and we will quote a real figure.

Do I need to hire a contractor to put up the steel?

No. The steel building is manufactured, delivered and set up by us. Call (252) 414-5105.

Is the steel for a Havelock building made in Greenville?

No. Panels are formed on the roll-forming line at our plant in Farmville, NC. The Greenville location is a sales lot where customers can walk in; nothing is produced there.

What has the biggest effect on a metal building’s price in Craven County?

Width and length, leg height, whether the roof is vertical or regular, the door packages, and whether Craven County wants certified drawings. Delivery is free within 100 miles for most sites around Havelock.

Will you quote a building near Newport?

Yes. Phone (252) 414-5105. From the Farmville plant we regularly deliver to Bridgeton, Newport, Morehead City and New Bern.

Your Havelock price within 24 hours

Send us the size, the county and what the building will hold. Our figure is based on current steel pricing, you are under no obligation, and if a different size would work better, we will say so.

Request a Quote Design It in 3D