We build it ourselves
Installation is ours as well, so the steel building needs no separate contractor.
Metal building prices in Jacksonville, NC are set by quote, never by chart. We price each building from the steel coil it uses, the framing it needs and the work of putting it up on your Onslow County lot; there is no national price list behind the numbers and no invented dollar amounts on this site. The steel is formed at our Farmville plant, and the Greenville location is a sales lot you can walk into. We build and install the building ourselves, so no separate builder is needed. To get a real quote, call (252) 414-5105.
Call (252) 414-5105
Get a Free Quote
A metal building for a Jacksonville lot is made, delivered and erected by the same company, ours. Because the work on the steel is ours from start to finish, there is no separate builder or contractor to find. Call (252) 414-5105.
Prices follow Onslow County permit rules and the Camp Lejeune corridor, along with humidity, coastal-plain wind options and the particular parcel, whether it is in Jacksonville, Richlands, Swansboro or Sneads Ferry. Our quotes come straight from the Farmville plant, not from a drop-shipped kit list. Hubert, Sneads Ferry, Swansboro and Richlands are among the nearby towns we serve routinely.
The footprint comes first: our clear spans reach 60′. After that comes leg height, because taller walls and clearance for an RV need more framing. Vertical panels that shed water, an A-frame with boxed eaves and the regular style all price differently. Doors and openings add to the total, from roll-up and walk-in doors to framed bays. Engineered drawings enter the picture when Onslow County asks for certification, and for most Eastern NC sites, delivery and installation cost nothing inside 100 miles.
In Jacksonville, county certification, the clear-span width needed for trucks or boats and the leg height needed for an RV or equipment usually shift a quote more than color choices do. No dollar amount is invented on this page; the way to a real figure for your footprint is to call (252) 414-5105.
You can reach East Carolina Outdoor Products at (252) 414-5105 or at 1046 Greenville Blvd SW, Greenville, NC 27834. When it helps, look over framing samples at the Greenville lots, and then we schedule delivery to Jacksonville, Richlands, Swansboro, Sneads Ferry and Hubert.
Take two buildings with the same footprint and the quotes can still differ widely, usually because of where each one will stand. The first factor is wind. Your county’s design wind speed sets the framing, the anchoring and whether certified drawings are mandatory, and the figure rises toward the coast. The second factor is the ground: a level, well-drained lot needs little work, whereas a low lot can call for fill, grading or a taller pad.
What remains is up to you. Roof style, leg height, the count and size of the doors, insulation and a concrete slab all change the total, and doors and height raise it faster than extra floor area does. Steel prices also change during the year, so we quote from today’s pricing; a printed chart would be wrong within a month.
To get a figure quickly, bring your address, rough dimensions and a list of what will go inside.
Most people here still judge storms by Florence in 2018, which brought rain for days and a surge that sent rivers through neighborhoods with no history of flooding. Its lesson for a new building is about siting and anchoring. A lot inside a mapped flood zone puts two questions ahead of all others: how high to raise the pad and how to anchor the frame. Near the water, a CAMA permit may be needed in addition to the county’s.
Being so close to salt water also affects the specification. Design wind speeds increase toward the ocean and the sounds, so framing, anchoring and certification that an inland site might skip are often compulsory here. Request certified drawings early: the Onslow County inspections office will ask for them, and your insurer may too.
Salt air works more slowly. A metal building holds up well if you rinse the panels twice a year and touch up fasteners and trim, and it will usually outlast whatever is parked inside. Camp Lejeune and MCAS New River are based in Jacksonville, and many of the buildings sold here go to families who know orders may come.
Your Onslow County site sets most of it: the size and height of the building, the roof style, the doors, any certification required, and what delivery and installation involve. Give us the footprint on (252) 414-5105 and we will price it.
No. We handle the whole job from manufacture to setup, so you do not need your own builder for the steel.
At our Farmville, NC plant. The Greenville location is a walk-in sales lot, not a roll-forming line.
Whether Onslow County requires certified drawings, the width and length, the leg height, the door packages and a vertical or regular roof matter most. Most sites near Jacksonville fall inside the 100-mile radius where delivery is free.
Yes. Phone (252) 414-5105. Regular deliveries from the Farmville plant go to Richlands, Swansboro, Sneads Ferry and Hubert.
Tell us the footprint, the county and what will be stored. The figure follows what steel costs today, nothing obliges you to buy, and if another size fits you better we will say so.