Metal Building Prices Near Me

Tan and brown metal garage with two roll-up doors

Quote-Only · Manufacturer · Eastern NC/SC/VA

The most useful thing to know about metal building prices near me is that you will not find a figure on our website. ECOP publishes no dollar figures, no price ranges and no per-square-foot rates, because every quote is sized to your footprint, your height, your openings and the certification your site needs. We roll-form the steel at our Farmville plant, keep a walk-in lot at 1046 Greenville Blvd SW in Greenville, and deliver to customers in eastern NC, SC and VA. Where we install, nobody else needs to be hired for the steel, and delivery is free within 100 miles. For a real quote, call (252) 414-5105 or send in the quote form.

Call (252) 414-5105

Get a Free Quote
money_1

Quotes, not price lists

No dollar figures, ranges or per-square-foot rates online.

Diverse Product Range

Nobody else to hire

ECOP builds and installs, so the steel needs no separate contractor.

power 2

Made in Farmville

The roll-forming is done at our Farmville plant, not in Greenville.

Locations

Greenville walk-in lot

Located at 1046 Greenville Blvd SW.

Support

Call for a quote

Dial (252) 414-5105.

delivery truck

Free delivery

Delivery within 100 miles is free.

money_1

Rent-to-own

Qualifying buildings need no credit check.

ECOPM28

Quote-only, with no dollar figures online

Our site lists no prices, price ranges, payment amounts or per-square-foot rates. To get a number, call (252) 414-5105 or send in the quote form. The quote spells out the size, the gauge options, the doors, any lean-tos and the certification your county needs.

Gray barn-style metal garage with two doors and side lean-tos

Nobody else to hire for the steel

Manufacturing, delivery and installation are all handled by ECOP. There is no outside builder to find for the steel, so questions about any stage go to one number: (252) 414-5105.

Red metal building with open bays on a wide concrete slab

What moves metal building prices near you

Width and length come first, followed by eave height, roof style and panel gauge. Walk-in and roll-up doors, lean-tos and insulation options each play a part, and so does certified engineering if your site needs it. Walk the samples at our Greenville lot before you decide.

White metal building with open bays, with a truck and equipment trailer nearby

Where we make it, show it and deliver it

All manufacturing happens in Farmville. The Greenville site is a walk-in lot and our address: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834. We quote and deliver across the eastern parts of North Carolina, South Carolina and Virginia, and delivery is free within 100 miles. You can also ask about buildings for sale and about kits. Rent-to-own is open on qualifying buildings, with no credit check.

Tan metal garage with two doors and an open lean-to

Why same-size metal buildings are priced differently

Same footprint, different quote: it happens often, and the reasons are usually local. Wind comes first. Every county has a design wind speed, which governs the framing, the anchoring and whether certified drawings are needed, and the figure grows as you move toward the coast. Ground comes second. Level, well-drained land asks little of you, while a low lot can add fill, grading or a taller pad to the work.

The rest is up to you. Roof style, leg height, the number and size of the doors, insulation and an optional concrete slab all feed the total, and doors and height raise it faster than extra floor area does. Because the price of steel shifts during the year, we price from current figures, and a posted chart would be out of date within a month.

The quickest route to a number is to arrive with three answers: where the building will stand, roughly how big it should be, and what it has to hold.

Tan metal garage with a lean-to and concrete driveway

Preparing the pad on Eastern North Carolina ground

Look at the ground before anything else. East of I-95 it is flat sandy loam over clay, with groundwater often only a few feet down. It makes superb farmland, and North Carolina grows more sweet potatoes than any other state, mostly in these counties. The same soil rewards some planning before concrete is poured.

Three habits help. Visit the site after a heavy rain and note where water collects. Build the pad up above the surrounding ground, compact the fill a layer at a time, and slope the surface so rain runs off by itself. Then choose anchors suited to sandy soil and check the county flood map, since a low lot may sit inside a mapped flood zone. Done well, the building keeps its contents dry for decades.

Specifications

  • Plant: Farmville, NC — roll-forming manufacturer
  • Walk-in lot: 1046 Greenville Blvd SW
  • Address: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Phone: (252) 414-5105
  • Panels: 29-gauge standard, 26-gauge upgrade
  • Widths: 12’–60′ clear span
  • Delivery: Free within 100 miles
  • Region: Eastern NC · Eastern SC · Eastern VA
  • Pricing: Quote via call or form only — never published online

Common Questions

Where can I find metal building prices near me?

Not on our website. Every building is priced to its own size and options, and no dollar figures are published online. Call (252) 414-5105 or send in the quote form.

Do you post price ranges or per-square-foot rates?

No. We publish no dollar figures, ranges or per-square-foot numbers on this site. For a number, call (252) 414-5105.

Would I have to bring in a separate builder?

Not for the steel building. ECOP builds it and installs it. Call (252) 414-5105.

Is your plant in Farmville or in Greenville?

In Farmville, NC. The Greenville location only receives walk-in visitors.

Is rent-to-own offered when no prices are posted online?

Yes, on qualifying buildings. Ask about terms when you call or send in the quote form. We publish no payment amounts on the site.

Your price within 24 hours

Tell us the size, the county and what you plan to keep in the building. Our figure is based on what steel costs now, it carries no obligation, and if another size would suit you better you will hear that from us.

Request a Quote Design It in 3D