Metal Buildings in Asheville, NC

Gray metal garage with a carport lean-to on a concrete pad

Asheville NC · Buncombe County · Western North Carolina

Deciding on a metal building in Asheville, NC comes down to what you will put under the roof and how much snow it has to carry. RV covers and garages are the best fit up here, as long as the structure is built for the weight of mountain snow, and where Buncombe County calls for it we supply engineered, certified drawings covering wind and snow. Seeing a finished building means leaving town, because Asheville and the rest of Buncombe County have no lot of ours. Inman, SC is the closest, about 45 miles away on I-26. Easley, SC follows at roughly 53 miles and Pelzer, SC at roughly 64. Asheville falls within 100 miles of each, which makes delivery and installation free for addresses in Fletcher, Arden, Black Mountain, Weaverville and Asheville itself.

Call (252) 414-5105

Get a Free Quote
Locations

Nearest lot: Inman, SC

Roughly 45 miles from Asheville by I-26. The address is 6855 Hwy 9, Inman, SC 29349, and the number is (864) 216-8670.

Quality Assurance

Drawings for wind and snow

Engineered and certified, and available wherever Buncombe County asks for them.

Quality Assurance

12-gauge for exposed sites

We frame in galvanized 14-gauge unless you ask for 12-gauge, which suits ridgelines and other high, exposed lots.

Diverse Product Range

Tall legs for RV covers

Legs run 9′ to 12′. At 12′, a Class A motorhome with roof units fits underneath.

delivery truck

Free delivery in Buncombe County

The whole county lies inside the 100-mile radius for no-charge delivery and installation.

Reputation and Trust

No builder for the shell

We make the shell, deliver it and put it up. The pad and the finish-out are yours to take care of.

Nearest ECOP lots to Asheville, NC

All 28 lots: ecopofnc.com/locations · open Mon–Fri 9am–5pm, Sat 9am–1pm

ECOP Inman, SC

6855 Hwy 9
Inman, SC 29349

(864) 216-8670
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Easley, SC

4314 Calhoun Memorial Hwy
Easley, SC 29640

(252) 414-5105
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Pelzer, SC

9491 Augusta Rd
Pelzer, SC 29669

(864) 745-5427
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions
ECOPM54

Is the drive to a lot worth it for an Asheville buyer?

Of our 28 lots, none stands in Asheville. To walk through a building you would head south, so it helps to know what is waiting at the end of the drive. The nearest is Inman, SC, roughly 45 miles from Asheville along I-26 by way of Saluda and Landrum. Its address is 6855 Hwy 9, Inman, SC 29349, and the number is (864) 216-8670. Easley, SC sits about 53 miles out, at 4314 Calhoun Memorial Hwy, Easley, SC 29640; calls for that lot come through our main line, (252) 414-5105. Pelzer, SC is about 64 miles out, at 9491 Augusta Rd, Pelzer, SC 29669, and its own number is (864) 745-5427. Hours are the same everywhere: 9am to 5pm Monday to Friday, and 9am to 1pm on Saturday.

So is it worth the trip? Go if you want to go over door placement, leg height and gauge in person. If you would rather not, the 3D designer plus a phone call can bring the very same building to your property. Every lot appears on our locations page.

Aerial view of a white metal building with a dark metal roof

What should an RV cover be built to handle in a Blue Ridge winter?

An RV cover built for the Piedmont would be the wrong one here. The land climbs from the floor of the French Broad valley to the ridgelines above Weaverville and Black Mountain, and a roof at that elevation can hold snow for weeks. Three choices matter most.

Height comes first. Our legs run 9 to 12 feet, and the tallest, at 12 feet, clears a Class A motorhome carrying air-conditioning units on its roof. Framing is second: galvanized 14-gauge is our standard, and 12-gauge is the better pick for an exposed mountain site. Third is the roof, and a vertical one lets snow and rain run off the ends rather than lie on the panels.

Then comes the paperwork. Buncombe County may or may not ask for drawings certified for snow and wind loads on a cover your size; practice differs from county to county and can change, so ask. Before you buy, we tell you whether your site needs certification, and if it does we supply the engineered drawings.

Steel frame of a metal building going up, with a lift on site

Hillside garages in Buncombe County, and why no builder is needed

The garage panels are 29-gauge steel, roll-formed at our Farmville, NC plant. We deliver the building and erect it ourselves, so nobody else has to be lined up for the shell. On mountain ground the real work is the site, and that part is yours: the pad or slab must be level, and the delivery truck must be able to reach it. If you live in a hollow near Fairview, or your driveway switches back off Reems Creek, make sure the truck has room to turn and enough clearance before you place the order.

A sloping lot is usually handled with a pad built by cut and fill and bounded by a retaining edge, and for a garage the normal base is a concrete slab. Once the steel is on site, the shell typically goes up within days. Everything after that is finish-out: wiring, insulation and interior walls, done by your own trades. The steel goes up in days; finish-out is what stretches a project into months.

Gray metal building with a tall roll-up door

How we price a metal building for an Asheville address

We do not keep a price list. Steel prices move, so a quote is worked out on the day you ask for it. The inputs are the footprint, the leg height, the framing gauge (14 or 12), the number of doors and windows, and the roof style, plus whether your site requires certified drawings. On a mountain lot, site work can weigh as heavily as the steel itself. Gravel, a slab, a retaining edge, grading and truck access to the pad are on your side of the job and are not in our number, and neither is finish-out.

To start, phone the Inman lot at (864) 216-8670 or our main number, (252) 414-5105. You can also lay out the building yourself in the 3D designer. Written quotes normally return within 24 hours. On qualifying buildings you can rent-to-own without a credit check, and we charge nothing for delivery and installation in Asheville.

Long white metal barn with arched openings along the side

Do shops and barns work on a mountain homestead?

They do. A frame that can span a wide RV cover without posts can span a shop or a barn. Widths run from 12 feet up to 60 feet, clear of interior posts, which suits hay-and-tractor barns in Alexander and Leicester, and the side businesses around Asheville that run a woodworking or mechanic shop out of a back lot. Galvanized steel does not rot in a damp cove the way wooden posts can, and a 12-foot leg leaves room for loaders and lifts.

Open equipment covers, partly enclosed barns and fully enclosed shops all use one panel-and-framing system, so each version is specified wall by wall in the same way. Barns carry snow just as covers do, so engineered drawings for wind and snow can be supplied wherever Buncombe County or a neighboring county asks.

Tan metal garage with a roll-up door and side carport

Settling the questions behind a metal building on an Asheville lot

Colors and sizes tend to get picked first, which is backwards. What decides whether a building still pleases you a decade on is the site, the permit and the contents. For the site, aim for the highest ground that still drains and lets a truck in, and measure setbacks to the property line, the well and the septic field. For the permit, phone the inspections office and ask what a building of your size must have in the way of paperwork and drawings. For the contents, list everything that will be stored in it over five years, items you have yet to buy included.

From that list the numbers follow. Width and length come from what you store, height from your tallest piece, and roof style from how much debris will land on it. On a mountain lot we usually recommend a vertical roof, because snow, leaves and pine needles slide off it more readily. Place the doors where your driveway runs, not where they would look even. Take the list to the Inman lot or put it on the quote form, and we will return an actual price.

White metal garage with cars parked in three open bays

Asheville after Helene: permits, flood maps and mountain ground

In the French Broad River valley, Helene’s flooding in 2024 changed how many Asheville property owners choose a building site. The sensible first step is a call to Buncombe County. Ask which permit and drawings a building of your size needs, and look at the flood map for your lot before a grader touches the pad. What you learn there can change the plan.

The ground comes next. West of the coastal plain, sand gives way to red clay, and level lots are the exception. Clay supports a slab well once it is cut and compacted properly, but it throws water off in a hurry, so settle where the runoff goes before grading. If the site slopes, tell us the drop across the footprint: it changes the groundwork far more than it changes the building.

The weather differs from the coast too. Hurricanes are normally worn out by the time they get here, though Helene proved how much rain the mountains and foothills can absorb in a day. Everyday risks are ice, now and then a heavy wet snow, and hard straight-line winds ahead of summer storms.

Specifications

  • Lot address: No lot in Asheville; nearest is 6855 Hwy 9, Inman, SC 29349
  • Phone: Inman lot (864) 216-8670 · ECOP main (252) 414-5105
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm at every ECOP lot
  • Nearest lots: Inman, SC (45 mi) · Easley, SC (53 mi) · Pelzer, SC (64 mi)
  • Widths: 12′ to 60′ clear-span, leg heights 9’–12′
  • Panels: 29-gauge, roll-formed at ECOP’s Farmville, NC plant
  • Delivery: Free delivery and installation within 100 miles; Asheville qualifies

Common Questions

Which ECOP lot should I visit from Asheville?

The closest is the Inman, SC lot, roughly 45 miles down I-26. Its address is 6855 Hwy 9, Inman, SC 29349, and its phone is (864) 216-8670. Easley, SC is about 53 miles off and Pelzer, SC about 64. Asheville and Buncombe County have no lot of ours, yet all three of these deliver and install here at no charge.

Is a snow-load rating required for RV covers around Asheville?

It depends on the size of the cover and on Buncombe County’s rules at the time of purchase, and requirements differ from county to county. We look at your site before you buy and tell you whether certification is needed. If it is, we supply the engineered drawings.

Will a delivery truck manage a steep driveway in the mountains?

That depends on the grade, the turning room and the overhead clearance. Describe the driveway when you ask for a quote, and cut back low limbs and fix soft spots before delivery day. The pad must be level and reachable, and preparing it is up to you.

Do addresses in Weaverville, Black Mountain and Hendersonville pay for delivery?

No. Buncombe County and its neighbor Henderson County both fall within 100 miles of the Inman, SC lot, so delivery and installation are free in Hendersonville, Fletcher, Arden, Black Mountain and Weaverville.

Is 12-gauge framing the right choice for a building above Asheville?

For an exposed ridgeline or any high site it often is, because 12-gauge is the heavier framing and handles snow and wind better. Standard 14-gauge galvanized framing is fine for most valley sites. Because gauge is a major factor in the quote, ask us to price both.

Can I get a quote without making the trip to South Carolina?

Yes. Lay out the cover or garage in the 3D designer, or phone (252) 414-5105 and give us the size, the leg height and where the doors go. A written quote based on current steel pricing usually follows within 24 hours.

Quotes back within 24 hours

Send the dimensions, the county and what the building has to hold. We price from current steel costs, commit you to nothing, and tell you if another size looks better for what you store.

Request a Quote Design It in 3D