Metal Buildings in Easley, SC

ECOPM53

Easley SC · Pickens County · Upstate SC

Around Pickens County, one building people ask about again and again is the detached shop, because a welder, a side business and a tractor can all outgrow a subdivision garage. Metal buildings in Easley, SC meet that need, and Easley, a commuter town on the US 123 road from Greenville to Clemson, is where we sell them. Our lot at 4314 Calhoun Memorial Hwy sells barns, carports and garages as well. Every building is roll-formed at our own plant, brought to your site and put up by one of our crews. The lot keeps weekday hours of 9am to 5pm and Saturday hours of 9am to 1pm.

Call (252) 414-5105

Get a Free Quote
Diverse Product Range

Open-floor shops

Clear-span widths run from 12′ to 60′, and a 40×60 shop keeps the entire floor open for lifts and equipment.

Diverse Product Range

Legs up to 12′ tall

Any building sold from the Easley lot can have legs from 9′ to 12′, tall enough for a lift or an RV.

Diverse Product Range

Made by ECOP

Our plant in Farmville, NC roll-forms 29-gauge panels straight from raw coil.

Relocated

Our own crew installs

No builder is involved, and sites within 100 miles of the lot get delivery and installation at no charge.

Quality Assurance

Drawings settled before you buy

We say up front whether your site in Pickens County will need engineered drawings for wind and snow loads.

money_1

A price within a day

Design your building or call us. Our quotes are based on current steel pricing and typically arrive within 24 hours.

Visit the ECOP lot in Easley, SC

All 28 lots: ecopofnc.com/locations · open Mon–Fri 9am–5pm, Sat 9am–1pm

ECOP Easley, SC

4314 Calhoun Memorial Hwy
Easley, SC 29640

(252) 414-5105
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Pelzer, SC · 14 mi

9491 Augusta Rd
Pelzer, SC 29669

(864) 745-5427
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Williamston, SC · 14 mi

980 Beaverdam Rd
Williamston, SC 29697

(864) 840-9033
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Anderson, SC · 22 mi

911 Whitehall Rd
Anderson, SC 29625

(864) 745-5415
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions
ECOPM32

How large a shop can you put on a lot in Pickens County?

Our shop buildings are clear-span steel in widths from 12 to 60 feet, so no posts interrupt the floor, even in a 40 by 60 shop. Legs come in heights from 9 to 12 feet, and the tallest is meant for jobs like a boat on its trailer, a two-post lift or a forklift stacking lumber.

The frame is 14-gauge galvanized steel as standard. A 12-gauge frame is available when you want it heavier, which makes sense on a wide span or on an exposed ridge above Pickens or Liberty. The 29-gauge panels on the roof and walls come off our roll-former, formed from raw coil at the Farmville, NC plant. Because we make, deliver and install the shell ourselves, you do not have to line up a builder. The only outside trades are the ones for wiring, plumbing and the interior finish you add later, and insulation can be ordered along with the building.

Gray barn-style metal building with four garage doors

Where is our Easley lot, and when is it open?

Our Easley sales lot stands on Calhoun Memorial Hwy at number 4314, Easley, SC 29640. It sits on US 123, the road that leads from Greenville, through Easley, to Central and Clemson. The lot opens at 9am on weekdays and closes at 5pm, and on Saturday it is open from 9am to 1pm. When you phone our main line, (252) 414-5105, ask for Easley.

Powdersville, Central, Liberty and Pickens are each a short drive from the lot, by way of US 123 or the state routes joining it. Come in with a rough footprint, and we can go through the leg height, the doors and which framing you prefer, 14-gauge or 12-gauge, before you order. A quote based on today’s steel prices should reach you inside 24 hours, and we say at the outset whether your Pickens County site will call for certified drawings for wind and snow loads. The full list of our 28 lots is at /locations/.

Aerial view of a metal building with a light blue roof and gravel drive

What the Blue Ridge foothills mean for a steel building near Easley

The ground rises at the northern end of Pickens County, toward the Blue Ridge Escarpment and Table Rock. Easley sits in the Piedmont, but sites farther north, around Pickens and into the foothills, get more wind on open slopes, quicker runoff on steep ground and a heavier load of winter precipitation.

That has two consequences for a metal building. The first is paperwork: whether a county wants engineered drawings for wind and snow load depends on the jurisdiction and the size of the building, and we tell you before you buy if your parcel needs to be certified, so you do not discover it at the permit counter. The second is the site. On a slope the pad must be cut level and compacted, and red clay, which is common throughout the Upstate, should be graded so that water runs away from the building instead of pooling against it. Gravel is adequate under many barns and equipment covers. A shop with a lift usually goes on a concrete slab.

Dark green metal building with a roll-up door

What decides the cost of a shop like this in Easley, and what comes after an order?

We quote each building individually and do not publish a price sheet, since the cost depends on what you choose. The main influences are certified engineered drawings, where your county asks for them; the footprint and the leg height; whether the frame is 14-gauge or 12-gauge; how many roll-up doors and walk doors you want and how large they are; and the foundation and any site preparation you arrange before delivery. Finish-out inside the building is a separate cost that your own trades handle.

The quickest route to a price is to design the shop in our 3D designer or just describe it on the phone. A quote reflecting current steel prices should reach you inside 24 hours. Once you order, we manufacture the panels and framing and deliver them to your Easley-area site at no charge within 100 miles, and the shell is typically standing within days. Qualifying buildings can also be rented to own, with no credit check.

Gray metal building with open bays and a covered porch

Are metal buildings in Easley only for shops, or do they suit garages and barns as well?

The clear-span frame that makes a good shop also suits everything else we sell from the Easley lot. Garages for two cars or three come with roll-up doors. Carports shelter trucks and boats, and RV covers can have legs up to 12 feet tall. Farms around Six Mile and Liberty order hay and equipment barns, and landscaping and contracting businesses order storage buildings. All of them have 29-gauge panels over galvanized framing.

We also sell commercial buildings reaching 60 feet in width to small businesses and contractors, and for re-roofing a building or adding a lean-to there are roofing and siding panels in 29-gauge metal. Because the widths run from 12 to 60 feet with no posts inside, you can match the building to the lot without planning around columns. We deliver and install every building, so no builder is needed for the shell.

Gray metal garage with two open doors and a lean-to under trees

Planning a detached shop for your Easley property

Begin with the contents, not the catalog. Write down everything the shop will hold during the next five years, counting what you have not bought yet. That list decides the footprint, and the tallest item on it decides the leg height. If rain, leaves and pine needles will be landing on the roof, a vertical roof is the better choice, since it clears them faster than other styles.

Then look at the ground. The best spot is the highest one with good drainage and a way in for a truck, with allowance made for the property line, the well and the septic field. After that, call the county inspections office to learn which permit and drawings your size of building calls for. Doors come last, and they go where the driveway meets the building rather than where they look balanced. Take your list to our Easley lot or put it in a quote request, and we will give you a real number.

Tan metal garage with two roll-up doors and side lean-tos

Pickens County paperwork, red clay and weather around Easley

Paperwork comes before groundwork. In the Upstate, what a county requires for a permit depends on the jurisdiction, the size of the building and its use, so ask Pickens County what it will want from you, and ask us whether your parcel needs certified wind and snow load drawings. After that, the question that shapes the cost of site preparation is the lay of the land: tell us how far the ground drops across the footprint and where water runs off it today.

The Upstate has red clay soil and rolling ground. Clay will carry a building well once it has been cut and compacted, but level lots are scarce, which is why the grading plan counts for more here than near the coast. Tropical storms generally bring the Upstate rainfall, not wind, though Helene delivered both in 2024. The routine wear comes from falling limbs, hail, summer thunderstorms and an occasional ice storm. Ice, leaves and water slide off a vertical roof more readily than a horizontal one, and extra leg height earns its keep the first time a boat bound for Hartwell or Keowee has to go inside.

Specifications

  • Lot address: 4314 Calhoun Memorial Hwy, Easley, SC 29640
  • Phone: (252) 414-5105 (ECOP main line; ask for Easley)
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm
  • Nearest lots: Anderson, SC · Pelzer, SC · Williamston, SC
  • Widths: 12′ to 60′ clear-span, leg heights 9’–12′
  • Panels: 29-gauge roofing and siding on 14-gauge galvanized framing (12-gauge available)
  • Delivery: Free delivery and installation within 100 miles

Common Questions

Where do I find the ECOP lot in Easley?

The lot is at 4314 Calhoun Memorial Hwy, Easley, SC 29640, along the US 123 road between Greenville and Clemson. It opens at 9am on weekdays and closes at 5pm; on Saturday it runs from 9am to 1pm. Ask for Easley when you phone our main line, (252) 414-5105.

How wide can a shop be before it needs posts inside?

It never does. Floors stay free of columns at every width we sell, from 12 to 60 feet, including the widest shops. Legs can be 9 to 12 feet tall. The standard frame is 14-gauge galvanized steel, and 12-gauge can be specified for bigger or more exposed buildings.

Will I need to hire a builder for a shop in Easley?

No. We manufacture the building, bring it to your property and put it up, so the steel shell needs no separate contractor. Wiring, plumbing and drywall do not come with the building; your own trades handle them afterward.

Will I pay for delivery to Pickens, Liberty or Central?

No. Any site up to 100 miles from one of our lots gets free delivery and installation, and from the Easley lot on Calhoun Memorial Hwy that distance covers the whole of Pickens County, with Six Mile, Central, Liberty and Pickens among its towns.

Will Pickens County ask for engineered drawings on my building?

That depends on the county, the size of the building and its use, so check with the county about your parcel. If the county asks for certified drawings covering wind and snow load, we provide them, and we say before you buy whether your Pickens County site is one of those cases.

How soon can I have a metal shop in Easley?

Expect a quote inside 24 hours. Once you order, we make the building, bring it to the site and generally have the shell up within days. The long part of any project is the interior work your own trades do afterward.

Describe the building, get a price in 24 hours

Give us the dimensions you have in mind, your county and what the building will hold. The price we send comes from what steel costs today and obliges you to nothing, and if a different size would serve the job better, we will flag it.

Request a Quote Design It in 3D