Metal Barns, Sheds & Garages in Newton Grove, NC

Gray barn-style metal building with four garage doors

Newton Grove NC · Sampson County · Eastern NC

Metal barns, sheds and garages in Newton Grove, NC offer one plain advantage on a farm: a clear-span steel building has no posts inside, so a combine header or a sprayer can pass through without dodging anything. Dry, open storage is what Sampson County farms need most, and these buildings provide it. Our Newton Grove lot is on Raleigh Street, close to the traffic circle where NC 50, NC 55, US 13 and US 701 meet. It serves Benson, Roseboro, Mount Olive, Dunn, Clinton and Newton Grove itself, along with the Goldsboro side of Wayne County. Our Farmville plant makes the panels and framing. Delivery and installation by our own crew cost nothing within 100 miles. A quote built on current steel pricing typically arrives within 24 hours.

Call (919) 394-1599

Get a Free Quote
Shed

Barns for equipment

Clear-span sheds in 40- and 60-foot widths, with room for tractors, planters or sprayers.

Diverse Product Range

Hay and feed storage

Enclosed dry space, with roll-up doors that let a loader in.

Diverse Product Range

Lean-to wings

Open bays can run along one side or both, to hold ATVs, trailers and implements. Ask us about them.

Diverse Product Range

Garages and shops

Two-bay and three-bay layouts with space for a lift and a farm truck.

Diverse Product Range

Carports

Carports for Sampson County’s heavy summer rain. Ask us which roof style sheds it best.

Quality Assurance

Certified drawings

Where the county requires wind-load engineered plans, we can supply them and confirm that before you buy.

Visit the ECOP lot in Newton Grove, NC

All 28 lots: ecopofnc.com/locations · open Mon–Fri 9am–5pm, Sat 9am–1pm

ECOP Newton Grove

708 Raleigh St
Newton Grove, NC 28366

(919) 394-1599
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Wilson · 40 mi

2302 US 301
Wilson, NC 27893

(252) 206-1124
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Kinston · 45 mi

2023 NC HWY 11
Kinston, NC 28504

(252) 643-0972
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Greenville Main · 58 mi

1046 Greenville Blvd SW
Greenville, NC 27834

(252) 364-8010
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions
Gray metal building with open bays and a lean-to, seen from the side

Why do Sampson County farms choose clear-span steel barns?

Today’s farm equipment is wider than the pole barns families built a generation ago. We frame clear-span buildings between 12 and 60 feet wide, with no posts inside. In a 40-by-60 shed, a tractor sits beside a folded planter with a lane to spare. Legs between 9 and 12 feet tall leave room for a tractor with a cab or for a grain trailer. The 29-gauge panels are rolled in Farmville, as is the galvanized 14-gauge framing, and the same crew that delivers the building installs it. Buildings that will be worked hard, or that span a great width, can be framed in 12-gauge instead. Lean-to wings along either side, or both, can store sprayers, ATVs or hay, so ask the lot about them. After the shell goes up, the power, water and interior work belong to your own trades.

Tan metal garage with two roll-up doors and side lean-tos

Finding the Newton Grove lot

Find us at 708 Raleigh St, Newton Grove, NC 28366. The lot is on Raleigh Street, close to the traffic circle where NC 50, NC 55, US 13 and US 701 meet, and its phone number is (919) 394-1599. The lot runs from 9am to 5pm Monday to Friday, and from 9am to 1pm on Saturday. From I-40 it is a quick run, so it is an easy stop from Goldsboro, Dunn, Clinton or Benson. Phone before you go to ask what is on display. Roof styles and panel colors are easier to judge in person, in daylight, and that alone is worth the trip. Quotes follow the steel market on the day you ask and usually arrive within 24 hours, and the lot will tell you at the outset if a site in Sampson County calls for certified engineered drawings. The panels are formed at our plant, 188 US 264 Alt in Farmville, which is not far off, so the lot is supplied from nearby.

Tan metal garage with two doors and an open lean-to

How does a steel building handle hurricane wind in Sampson County?

The town is inland enough to avoid the full force of a storm coming ashore. Even so, a hurricane moving up the Coastal Plain brings tropical wind and rain to Sampson County, and that shapes how a steel building is specified. Where a county requires wind and snow load drawings, we provide them, certified and engineered, and we tell you before you buy whether your site is one of those. Since wind-zone rules differ from county to county, check yours with Sampson County. Past certification, three details matter most on a farm building. The first is the base: anchors resist uplift best when they are set in concrete or well-compacted gravel, and worst in loose sandy soil. The second is a roof style that drains heavy rain quickly, which is worth raising with the lot. The third is to close in the sides at the windward end of the building, since left open it acts like a sail. For large, open barns, 12-gauge framing is worth discussing with the lot.

Finished metal shop interior with white liner panels and lighting

Does humidity in Eastern North Carolina rust a steel barn?

Bare steel struggles in Eastern North Carolina’s humidity, so galvanized framing matters. Galvanizing coats the steel in zinc, which stands between the metal and the damp summer air over Sampson County, and every ECOP frame is galvanized as standard. Some habits add protection. Slope the pad so water does not stand along the base rail. Store fertilizer a little way from the walls, because some products attack metal when they get damp. Rinse off chemical splashes and pressure-washer overspray. Closed barns need ventilation, so vents, or gable ends left open, let damp air escape. Livestock feed in the barn, or a poultry or hog operation close by, is worth mentioning to the lot, because ammonia in the air can affect which panels and trim make sense. Settle that before you place an order.

Red metal barn with lean-tos on both sides

What decides the price of metal barns, sheds and garages in Newton Grove?

We leave prices off the page on purpose: steel is priced at the current market, and a quote reflects the day you ask. The cost of a barn or an equipment shed depends on a short list of factors that is the same every time. Size comes first: width, length and height all use steel, and the most goes into a building 60 feet wide with 12-foot legs. Then gauge: standard framing is 14-gauge, and stepping up to 12-gauge adds cost. If Sampson County requires certified engineered drawings, they add a line to the quote. How many sides are closed in, whether there are lean-to wings, and the doors you choose all add to it as well. Site preparation, the pad itself (slab or gravel), and any power or water service you add later are not part of the quote. At the lot in Newton Grove, bring a size and an idea of the options you want, and a quote typically follows within 24 hours. If a building qualifies, rent-to-own is available, and there is no credit check.

Tan and brown metal garage with two roll-up doors

Before you pick a size for a Newton Grove barn

People tend to ask about size and color first. The decisions that determine whether you are still happy with a barn or shed years from now come earlier. One is the site: look for the highest, best-drained patch your trucks can still reach, and make sure it clears the setbacks from your property line, your well and your septic field. Another is the rulebook. The county inspections office can tell you which permit your building needs and whether drawings must come with it.

The third is use. Over the coming five years, what will go inside? List all of it, including what you have yet to buy. Let that list set the width and length. The tallest item sets the leg height, and the amount of debris the roof will catch points to the roof style, with a vertical roof clearing pine needles, leaves and rain most easily. Put the doors where the driveway runs, not where they look balanced. Take your list to the lot, or fill in the quote form, and a real number will follow.

ECOPM28

What Newton Grove ground and storms mean for a building

Newton Grove is where the roads cross in Sampson County, known to everyone for its traffic circle, and the first thing to know about building near it is how close the water table lies. The ground is typical of the inner coastal plain: flat, a sandy loam layer sitting on clay. That suits sweet potatoes and tobacco well, and a slab in the lowest corner of the property far less. After the next hard summer thunderstorm, walk your land, note where water stands, and put the building somewhere else.

Matthew in 2016 and Floyd in 1999 both reached this far inland as rain, and the Tar and Neuse rivers overflowed for days afterward. Wind is a factor as well, yet for most of Sampson County the questions that count are drainage, a pad shaped to shed water, and anchors matched to the soil. Close to a creek or river? Look up the county flood map before you commit to a site. It takes about five minutes, and it can spare you an insurance headache later.

Specifications

  • Lot address: 708 Raleigh St, Newton Grove, NC 28366
  • Phone: (919) 394-1599
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm
  • Nearest lots: Kinston (NC 55 East), Wilson (I-95 North); full list at /locations/
  • Widths: 12′ to 60′ wide, clear-span with no interior posts
  • Framing: Galvanized 14-gauge standard, 12-gauge available
  • Delivery: Free delivery and install, 100-mile radius

Common Questions

Where is the Newton Grove lot and when is it open?

The address is 708 Raleigh St, Newton Grove, NC 28366, close to the traffic circle where NC 50, NC 55, US 13 and US 701 meet. Call (919) 394-1599. Opening hours: 9am to 5pm Monday to Friday, 9am to 1pm on Saturday. Phoning ahead will tell you what is on display.

Will my combine or wide planter fit inside an ECOP barn?

Yes, as long as it fits within the limits: clear-span widths go up to 60 feet and legs up to 12 feet. Take the width of your widest implement when folded and the height of your tallest cab, and leave extra room at the door. The lot can size the opening and the legs so your equipment gets in and out comfortably.

Are farm buildings in Sampson County exempt from permits?

Exemptions for agricultural buildings exist in some places, though they depend on the county and on how the building is used, so ask Sampson County before you order rather than assume. We will say ahead of the sale whether your site calls for certified engineered drawings, and supply them if it does.

How long does it take to put up a barn near Clinton or Dunn?

After the shell arrives from the Farmville plant, our crew can usually have it standing within days, as long as the slab or gravel pad is finished and the site can be reached. Power, water and interior work are for your own trades, and they take longer than the steel does.

Can I buy metal roofing panels from ECOP to re-roof a tobacco barn or a house?

Yes. We sell 29-gauge roofing and siding panels, all roll-formed from coil at 188 US 264 Alt, the address of our Farmville plant, in the same region as Newton Grove. For a re-roof, the lot can quote panels and trim from that day’s steel prices, typically within 24 hours.

Does the Newton Grove lot offer rent-to-own on barns?

Yes, on qualifying buildings, and there is no credit check. When the lot prepares your quote, it will explain which barn and shed layouts qualify. Bank and farm-credit financing are a separate matter that depends on the lender, so ask yours as well.

Send a size, get a quote within 24 hours

Give us the size you have in mind, your county and what the building will hold. We price from current steel costs, you are under no obligation, and should a different size suit you better, we will say so.

Request a Quote Design It in 3D