Metal Buildings in Piedmont, SC

White metal garage with black trim and two roll-up doors

Piedmont SC · Anderson County · Upstate South Carolina

Metal buildings in Piedmont, SC, are easy to check out in person, even though ECOP has no lot in town. From Piedmont it is about 4 miles along US 29 to the lot in Pelzer, SC. Williamston, SC is about 6 miles away and Easley, SC about 10. Few places in the Upstate are nearer to an ECOP lot than Piedmont, Powdersville and the mill villages on the Saluda River. For this part of the Upstate we would point you to a steel shop or commercial building with a clear span, as wide as 60 feet. We manufacture it, deliver it and erect it, and the slab and everything inside it stay with the owner’s trades. The same panel system also makes our garages, carports and barns.

Call (252) 414-5105

Get a Free Quote
Locations

Nearest lot is in Pelzer

9491 Augusta Rd, Pelzer, SC 29669, about 4 miles away. Open Monday through Friday, 9am to 5pm, and Saturday, 9am to 1pm. Phone (864) 745-5427.

Diverse Product Range

Clear-span shops to 60′ wide

No interior posts. Legs of 9′ to 12′ leave room for a lift or a tall roll-up door.

Diverse Product Range

Steel shell only

We put up the steel; you hire the trades for the slab, the wiring and the interior finish.

power 2

Made by ECOP in Farmville

Raw coil becomes 29-gauge panels on our roll-forming line at the plant in Farmville, NC.

delivery truck

Delivery and install cost nothing

Piedmont and Powdersville are only minutes from three lots, so both sit well within the 100-mile radius.

Quality Assurance

Certification settled before you buy

We tell you up front whether your site in Anderson County needs engineered drawings.

Nearest ECOP lots to Piedmont, SC

All 28 lots: ecopofnc.com/locations · open Mon–Fri 9am–5pm, Sat 9am–1pm

ECOP Pelzer, SC

9491 Augusta Rd
Pelzer, SC 29669

(864) 745-5427
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Williamston, SC

980 Beaverdam Rd
Williamston, SC 29697

(864) 840-9033
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Easley, SC

4314 Calhoun Memorial Hwy
Easley, SC 29640

(252) 414-5105
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions
Four-bay metal garage with the doors open

Metal buildings in Piedmont: what we supply and what stays with you

The steel shell is our part. It consists of galvanized framing and 29-gauge panels for the roof and walls, with roll-up doors, walk-in doors and windows set into the walls wherever your layout puts them. Our own crew delivers the building and puts it up on your site. Buildings have no posts inside, and they run from 12 up to 60 feet wide, with legs 9 to 12 feet tall. Panel insulation is available as an option. The slab, the electrical service, any plumbing the building needs and the interior finish are yours to arrange. We hand you the footprint and the anchor layout, and your concrete contractor works from those so the slab is poured before our crew shows up.

White metal garage with cars parked in three open bays

Lots near Piedmont and Powdersville

Piedmont has no lot of its own, yet three lots are near enough that you can simply pick the one in the direction you usually drive. The Pelzer lot, at 9491 Augusta Rd, Pelzer, SC 29669, is the closest, about 4 miles south on US 29, and its phone is (864) 745-5427. Williamston, SC lies about 6 miles away at 980 Beaverdam Rd, Williamston, SC 29697; call (864) 840-9033 there. The lot at 4314 Calhoun Memorial Hwy, Easley, SC 29640, is about 10 miles off, and you reach it through our main line, (252) 414-5105. All the lots open at 9am and close at 5pm Monday through Friday, and at 1pm on Saturday. If you are planning a shop or a commercial building, visit a lot and bring your layout along, so that door placement, certification, span and leg height are settled before you commit to a footprint. The complete list of all 28 lots is at /locations/.

White metal building with a new concrete apron

Red clay and your slab in Anderson County

Red clay, the Upstate kind, covers the ground from the Saluda River to Powdersville. It swells when it is wet and shrinks as it dries, so shape the pad to drain water away from the building and compact the base. Pour the slab to the footprint dimensions and anchor layout we provide, thickening the edges under the base rail. Allow it to cure before delivery day: anchoring happens on the day the building goes up, and a slab that is still soft or not square holds up the whole job. Heated or cooled buildings call for insulation along the slab edge, and for panel insulation chosen when you place the order.

Tan metal garage with lean-tos on both sides

Why steel building quotes vary, and how we price the shell

Quotes differ because the number rests on six inputs: how wide, how long and how tall the legs are; whether the framing is 14-gauge or 12-gauge; whether Anderson County requires certified engineered drawings; how many doors and windows go in, roll-up and walk-in alike; whether you add insulation; and what steel costs that day. We base the figure on current steel pricing and usually return it within 24 hours, because a printed price list would be stale within weeks. Your own contractors price the slab and the site work separately, outside the steel number, so make sure the quotes you compare cover the same scope.

Gray metal garage with a carport lean-to on a concrete pad

A Piedmont garage now, an addition later

That works. A lean-to can go onto either side of one of our buildings, and the building itself can be extended in 5-foot bays as long as nothing blocks the end wall. A common route for Powdersville owners is a 30×40 shop first and, about a year later, a roofed side to shelter a trailer or boat. Mention any additions you are considering to the Pelzer lot when you order, so the doors and the end wall are placed to leave room for them.

White metal building with three overhead doors and a timber-framed entry

Planning a metal building in Piedmont before you pick a size

Most buyers start by choosing a size and a color. A better start is three questions that decide how you will feel about the building a decade from now. Where will it sit? Look for the highest ground that drains well and still has a way in, and keep the required setbacks from the septic field, the well and the property lines. What will the county want? The inspections office can tell you which permit and drawings apply to a building of your size. And what will you keep in it? Write out what it will hold over the next five years, equipment you have not bought yet included.

Those answers settle most of the rest. The contents decide width and length, the tallest item decides leg height, and the amount of debris decides the roof: where leaves and pine needles fall, a vertical roof clears them best. Place the doors to suit the driveway, even if that leaves the front looking lopsided. Take your list to a lot, or enter it on the quote form, and the number we send back will be a real one.

Tan three-door metal garage at the end of a concrete driveway

Red clay, slopes and storms around Piedmont

Start with the ground. Piedmont sits astride the Saluda River and the line between Greenville and Anderson counties, and the Upstate around it is rolling country on red clay. After it has been cut and compacted, clay makes a firm base. The catch is that level lots are rare, so the grading plan counts for more here than on the coast. Let us know how much the ground slopes across your building site and which way runoff heads now; nothing is as useful before anyone quotes the site work.

Tropical storms mostly arrive in the Upstate as downpours, not wind. In 2024, Helene came with both. The everyday wear on a building comes from falling limbs, hail, summer thunderstorms and now and then an ice storm. On a vertical roof, water, leaves and ice slide off more readily than on a horizontal one, and when you first back a boat bound for Hartwell or Keowee in under it, some extra height in the legs will have been worth it.

Specifications

  • Lot address: No lot in Piedmont; nearest is 9491 Augusta Rd, Pelzer, SC 29669
  • Phone: Pelzer lot (864) 745-5427 · ECOP main (252) 414-5105
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm at every ECOP lot
  • Nearest lots: Pelzer, SC (4 mi) · Williamston, SC (6 mi) · Easley, SC (10 mi)
  • Widths: 12′ to 60′ clear-span, leg heights 9’–12′
  • Panels: 29-gauge on 14-gauge galvanized framing; 12-gauge available
  • Delivery: Free delivery and installation within 100 miles; Piedmont qualifies

Common Questions

Which ECOP lot is closest to Piedmont?

The Pelzer lot, at 9491 Augusta Rd, Pelzer, SC 29669 (phone (864) 745-5427), is about 4 miles south on US 29. Williamston, SC lies about 6 miles away at 980 Beaverdam Rd, and Easley, SC about 10 miles away at 4314 Calhoun Memorial Hwy. Piedmont itself has no ECOP lot.

Does ECOP handle the entire build, slab included?

The steel building is ours from start to finish: we manufacture it, deliver it and install it, from framing and panels to doors, windows and any insulation you choose. Your own contractors handle the slab, the electrical work, plumbing and the interior finish.

Can I finance a steel building for a shop or business in Anderson County?

No credit check is needed for rent-to-own, which is available on qualifying buildings, and the Pelzer lot can tell you if yours qualifies. Upstate banks and equipment lenders also finance steel buildings. Insurers generally cover steel buildings too. Either way, keep the permit and the certified drawings together in one folder.

What widths can I choose for a steel building from ECOP?

They are 12 to 60 feet wide and clear-span, so there are no posts inside. Any length works as long as it comes in 5-foot steps, and legs can be 9 to 12 feet tall.

Does a building in Anderson County need engineered drawings?

Possibly. Permit requirements and drawings certified for wind and snow load depend on the county, on how large the building is and on what it is used for, and the rules change. We check your site and tell you before you buy whether certification is needed, and if it is, we supply the drawings.

How long after delivery will the shell be standing in Piedmont?

In most cases the shell is up within days of delivery, so long as the slab is complete and the site can be reached. The slow part is the interior work your trades do, which takes months. That is why the slab, the plumbing sleeves and the utilities should all be sorted out before the steel is delivered.

A Piedmont quote within 24 hours

Give us the width and length you are considering, your county and what the building will hold. We work from today’s steel prices and attach no obligation to the quote. If a different footprint would serve you better, expect us to say so.

Request a Quote Design It in 3D