Metal RV Covers, Garages & Barns in Richfield, NC

Charcoal metal garage with two roll-up doors and a lean-to

Richfield NC · Stanly County · Central NC

If you are shopping for metal RV covers, garages and barns in Richfield, NC, start with what you can check yourself: the lot, the plant and the price. The lot sits one block off US 52 on West Church Street and serves Richfield and New London, Gold Hill and Badin, Albemarle, Norwood and Locust. Each cover and garage is made at our plant in Farmville, NC, and our own crew delivers and installs it free of charge anywhere within 100 miles. The price follows the cost of steel on the day you ask. Stanly County is full of campers and boats, with Morrow Mountain, Lake Tillery, Badin Lake and the Uwharrie National Forest all nearby, and a steel cover is the simplest way to keep a pontoon or motorhome out of the sun and hail between outings.

Call (704) 463-1802

Get a Free Quote
Diverse Product Range

RV covers on 12-foot legs

With 12-foot legs, motorhomes, fifth wheels and travel trailers fit underneath. Ask us about roof styles.

Diverse Product Range

Boat and pontoon covers

Wide spans for boats and pontoons that make the trip to Lake Tillery or Badin Lake on a trailer.

Diverse Product Range

Enclosed garages

Garages closed in on all sides for two or three cars, finished with roll-up doors and trim to match.

Shed

Barns and equipment sheds

Open interiors for hay and tractor storage, built for farms near Norwood and New London.

Diverse Product Range

Storage buildings

Steel storage you can lock, from 12 feet wide, delivered and installed by us.

money_1

Rent-to-own

Qualifying buildings need no credit check. The lot can tell you which ones qualify.

Visit the ECOP lot in Richfield, NC

All 28 lots: ecopofnc.com/locations · open Mon–Fri 9am–5pm, Sat 9am–1pm

ECOP Richfield

321 A W Church St
Richfield, NC 28137

(704) 463-1802
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Salisbury · 20 mi

1330 Jake Alexander Blvd W
Salisbury, NC 28147

(980) 234-6437
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Mocksville · 34 mi

1765 HWY 601 North
Mocksville, NC 27028

(336) 936-9142
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Statesville · 38 mi

590 Mocksville Hwy
Statesville, NC 28625

(704) 450-3605
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions
ECOPM28

Where to find our Richfield lot

The Richfield lot is at 321 A W Church St, Richfield, NC 28137, in the middle of town. Look for it west of US 52, about halfway between Salisbury and Albemarle if you drive that highway. You can phone the lot at (704) 463-1802 or visit Monday to Friday from 9am to 5pm, or on Saturday from 9am to 1pm. Before you drive over, ask whether an RV cover is on display, since the surest way to tell whether your camper will clear with its air conditioner on top is to stand under a 12-foot leg. Quotes are worked out from current steel pricing, generally within 24 hours, and before you buy the lot will say whether Stanly County asks for certified engineered drawings on a building like yours. If you would like to arrive with a plan, sketch the building in the 3D designer, and the lot can quote from your design directly.

Gray metal building with tall open bays

Choosing the leg height of a metal RV cover in Stanly County

Your starting number is the highest point on the coach, usually a rooftop air conditioner or a satellite dome. To that, add room for the door opening, and allow for the roof pitch where it comes down to the eave. Legs come in heights from 9 to 12 feet. Fifth wheels and Class A coaches usually need the full 12, while many travel trailers and pop-ups sit comfortably under 9 or 10 feet. Then there is width. For one RV, a cover only has to clear the coach by a little, but a wider one can also shelter a second vehicle or a boat, and our frames span as far as 60 feet with no interior posts. If your site is on the Uwharrie side of the county, ask about a vertical roof; pine straw and leaves slide straight off it. And if you might add sides and a back wall someday, say so when you place the order.

Steel frame of a metal building going up, with a lift on site

Will rocky ground around Richfield cause trouble for an install?

Shallow rock and uneven ground turn up in the northern end of Stanly County, around Richfield and New London and over toward Gold Hill and Badin Lake, and, as across the rest of the Piedmont, there is red clay as well. Two things follow: how much grading the pad will take, and what kind of anchors the building needs. A level, well-compacted gravel pad is all an RV cover or carport requires. A garage with walls, or a barn you intend to finish inside, is better off on a concrete slab. Because anchors for concrete, gravel and bare ground are not the same, tell the lot which base you are preparing. The building quote does not include grading or the pad, so find out from the Richfield lot what site preparation it expects before the crew arrives. And if your site slopes, ask how much fall the crew can accommodate before you hire a grader.

Large gray metal building with open equipment bays on a freshly graded site

Barns and storage buildings: one purchase, no separate builder

Buying a barn or storage building from us means one purchase covers the whole shell. We roll-form the 29-gauge panels and the galvanized framing at our plant, 188 US 264 Alt in Farmville, NC, then deliver them, and our crew assembles the building on your Stanly County land. No separate contractor is needed for the structure, and nothing arrives as a kit for you to figure out yourself. Widths from 12 to 60 feet are clear-span, so there are no posts down the aisle of a hay barn or equipment shed. Framing is 14-gauge galvanized unless the building is wider or will work harder, in which case 12-gauge is available. The inside is finish-out, and that belongs to your own trades: power, water, stalls, insulation and partitions once the shell stands. Rent-to-own is open on qualifying buildings, and it needs no credit check.

White metal building with a tall RV-height lean-to

What sets the price of a metal RV cover or garage in Richfield?

There is no printed price list, because we buy steel at the going market rate and quote from that day’s cost. A Richfield quote moves with the same things as any other. Size matters first: a motorhome needs a 12-foot leg, which takes more steel than the 9-foot leg that suits a car, and width and length add to it. Next is gauge, with 12-gauge framing costing more than the 14-gauge standard. After that comes certification, which applies if Stanly County wants engineered drawings for wind and snow loads. Then there is how enclosed the building is: open, closed on two sides, or fully shut with doors. None of the quote covers site prep, the slab or gravel, or finish-out. Tell the lot the size you have in mind and the options you want, and a quote typically comes back within 24 hours.

Gray barn-style metal building with four garage doors

Planning a metal RV cover or garage before you call

Most buyers think about size and color first, yet the choices that matter in ten years come earlier. Choose the spot: drainage, access for a truck and trailer, and enough distance from your boundaries, well and septic field. Call the inspections office and ask what permit and drawings the building will need. Then list what it must hold during the coming five years, counting the camper or boat you have not bought yet.

From that list, the building follows. What you store sets width and length. The tallest item, which on a motorhome is whatever sits on the roof, sets the leg height. How much debris lands on the roof sets the roof style, and under oaks and pines a vertical roof clears needles, leaves and rain best. Place the doors where the driveway runs, whether or not that looks balanced. Take the list to the Richfield lot, or enter it on the quote form, and a real figure comes back.

White metal building with a lean-to over a concrete pad

Storms, clay and slopes on a Richfield site

Hurricanes seldom reach Richfield with their strength intact, but Helene in 2024 was a reminder of how much rain the foothills and mountains can absorb in a single day. Season to season, the usual trouble is ice, a heavy wet snow once in a while, and sharp straight-line winds in front of summer storms. Siting and anchoring both respond to that: put the building where water leaves rather than gathers, and match the anchors to the base. A vertical roof also lets snow and fallen leaves slide off more freely than a horizontal one, so we lean toward it wherever oaks or pines hang over the spot.

Richfield is a small town on US 52 in Stanly County, set in rolling Piedmont farm country, and the ground is red clay rather than the sand found nearer the coast. A level lot is the exception. Clay holds up a slab nicely once it has been cut and compacted, though it sheds water fast, so settle where the runoff goes before the pad is graded. On a sloping site, give us the fall across the footprint; it matters far more to the site work than to the building.

Specifications

  • Lot address: 321 A W Church St, Richfield, NC 28137
  • Phone: (704) 463-1802
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm
  • Nearest lots: Salisbury (US 52 North), Mocksville (via US 601)
  • Leg heights: 9′ to 12′
  • Widths: 12′ to 60′ clear-span, no interior posts
  • Delivery: Delivered and installed free within 100 miles

Common Questions

Where is the lot in Richfield, and when is it open?

Look for 321 A W Church St, Richfield, NC 28137, in town and one block west of US 52. Call (704) 463-1802 or stop by from 9am to 5pm Monday to Friday, or 9am to 1pm on Saturday. If you hope to see an RV cover in person, ask by phone whether one is on display before you drive over.

Can I add sides to an RV cover and turn it into a garage later?

Closing it in afterward depends on how the cover was framed, so ask the Richfield lot about the specific one you like. Adding a rear wall, side walls and a roll-up door is what turns a cover into a garage, and the framing decides whether that is possible. If you might want it, tell us when you order, and the legs, roof style and framing can be chosen with doors in mind.

Is delivery available in Albemarle, Norwood and Locust?

Yes, at no charge. Any address up to 100 miles from an ECOP lot gets delivery and installation free, and that includes every part of Stanly County, from Albemarle and Norwood to Badin, Oakboro and Locust, as well as the neighboring counties of Cabarrus, Montgomery and Rowan. If your site is farther out, ask the Richfield lot.

Do I need a permit for an RV cover in Stanly County?

The answer changes from county to county and depends on how large the structure is and how it is anchored, so check with Stanly County before you place an order. We check whether certification applies at your site before you buy, and where Stanly County asks for certified drawings covering wind and snow loads, we supply them.

Can the Richfield lot price metal roofing for a barn re-roof?

Yes. Our Farmville, NC plant turns raw coil into 29-gauge roofing and siding panels, and the Richfield lot can price those panels plus trim for re-roofing a barn, a house or a shed, based on the current steel market. Answers usually come within 24 hours.

Your Richfield quote in 24 hours

Tell the Richfield lot what size you want, which county the site is in and what you plan to keep under the roof. The price is worked out from the cost of steel right now. Asking commits you to nothing, and if a different size would fit better, we will say so.

Request a Quote Design It in 3D