Shops, Garages & Steel Buildings in Stokesdale, NC

Red metal building with open bays on a wide concrete slab

Stokesdale NC · Guilford County · Piedmont Triad

The first decision on any new building is its size and type, and the room you have to work with usually settles both. Land is what makes a proper shop practical, and northwest Guilford County is where the acreage lots on the Greensboro side of the map begin. For shops, garages and steel buildings in Stokesdale, NC, our lot on Ram Loop Drive is the place to start. Drivers reach it on either NC 68 or US 158, which meet in town, and it serves Madison to the north, Oak Ridge, Summerfield, the Belews Lake end of the county and Stokesdale itself. Steel panels in 29-gauge and galvanized framing are made at our Farmville, NC plant, and delivering and erecting the shell costs nothing within 100 miles. The same lot handles garages and carports as well as commercial buildings as wide as 60 feet, and a quote, based on the current price of steel, usually arrives within 24 hours.

Call (336) 575-7451

Get a Free Quote
Diverse Product Range

Shops and workshops

Sizes include 30×40 and 40×60, with 12-foot legs that leave room for lifts and equipment.

Diverse Product Range

Commercial buildings

A clear-span building as wide as 60 feet suits a contractor or small business located on NC 68 or US 158.

Diverse Product Range

Garages and roof styles

Pick the color and trim to blend into a subdivision lot, and ask us which roof styles are offered.

Diverse Product Range

Single and double carports

Built for commuters who drive south on NC 68 to Greensboro.

Diverse Product Range

Boat covers

High covers over boats that are kept close to Belews Lake.

Quality Assurance

12-gauge framing

Heavier framing can be specified for the widest spans and for overhead loads.

Visit the ECOP lot in Stokesdale, NC

All 28 lots: ecopofnc.com/locations · open Mon–Fri 9am–5pm, Sat 9am–1pm

ECOP Stokesdale

341 Ram Loop Dr
Stokesdale, NC 27357

(336) 575-7451
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Mocksville · 40 mi

1765 HWY 601 North
Mocksville, NC 27028

(336) 936-9142
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Salisbury · 49 mi

1330 Jake Alexander Blvd W
Salisbury, NC 28147

(980) 234-6437
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions

ECOP Statesville · 55 mi

590 Mocksville Hwy
Statesville, NC 28625

(704) 450-3605
Mon–Fri 9am–5pm, Sat 9am–1pm

Directions
Steel frame of a metal building going up, with a lift on site

Which shops, garages and steel buildings do we build around Stokesdale?

Across Guilford County we put up clear-span steel shells anywhere from 12 to 60 feet wide. Typical orders are workshops, garages and carports, buildings for contractors and their equipment, and commercial space for businesses on NC 68 and US 158. ECOP makes the building, hauls it to your property in Stokesdale or Summerfield and erects it, so no separate builder is involved in the structure. The shell is the framing, the roof and wall panels in 29-gauge, and the windows, walk doors and roll-up doors framed in wherever your layout calls for them. Insulation is available as an option. Your own trades handle the concrete slab, the electrical service and everything inside, which keeps the steel quote simple and lets you do the rest in stages.

ECOPM28

Finding the lot in Stokesdale: address, hours and directions

The street address is 341 Ram Loop Dr in Stokesdale, NC 27357, up in the northwest corner of Guilford County, where US 158 crosses NC 68. The lot is open weekdays from 9am to 5pm and on Saturday from 9am to 1pm; the number is (336) 575-7451. From Greensboro, drive north on NC 68 into town. Visitors from High Point or Oak Ridge approach on NC 68 from the south. Phone before you drive out and ask what is on view, because roof styles, panel colors and door options are far easier to judge in person than on a screen. Pricing at the lot starts from the day’s steel cost, and a quote typically comes back within 24 hours. Certification is sorted out before you buy: the lot can say whether your site will need engineered drawings for wind and snow loads. A design you have already built in the 3D designer can be brought to the lot and quoted from there.

Aerial view of a metal building with a light blue roof and gravel drive

Will a subdivision around Summerfield or Oak Ridge allow a steel building?

That depends on the subdivision. Restrictive covenants on accessory buildings, exterior materials or minimum sizes are attached to some of the bigger lots in Summerfield, Oak Ridge and Stokesdale, while unrestricted rural parcels along US 158 toward Madison are not bound by rules like these. Read your covenants before you order, and if there is a homeowners association, put the question to it in writing. County permitting is a separate matter: Guilford County sets its own requirements for accessory structures, and they vary with size and use, so check with the county. If the building will sit beside a house, the lot can talk you through roof styles, colors and matching trim, and a garage that looks like part of the property is often what a review committee wants. Before you buy, we will also say whether your site needs certified engineered drawings.

Tall gray metal building with roll-up doors

How much would a shop or garage in Stokesdale cost, and why is the price not posted?

Steel is bought on the open market, and every quote starts from the coil cost of the day, which is why we print no price list on this site. The things that drive the number do stay the same from job to job. Size sets the baseline: width, length and leg height. Gauge comes next, and 12-gauge framing costs more than the standard 14-gauge. If Guilford County requires certified engineered drawings for your building, they appear as a separate line item. After that come the doors and windows, the roof style and how many sides are enclosed; a commercial building with a number of walk doors and windows will price differently from a plain shop. Last is everything outside our scope: grading, the slab and finishing the inside. Hand the Stokesdale lot your footprint and the options you want, and a quote typically follows within 24 hours. Qualifying buildings can also be rented to own, with no credit check.

White metal building with a new concrete apron

How far from Stokesdale will our crew install?

We deliver and install at no charge when the site is no more than 100 miles from an ECOP lot. Measured from Stokesdale, that takes in all of Guilford County, Greensboro and High Point included; the Rockingham County towns of Madison, Reidsville and Eden; Stokes County and Walnut Cove; Kernersville and Winston-Salem; and the Danville side of Virginia to the north. The building is made at the Farmville plant and an ECOP crew erects it on your site, so ask the lot what kind of pad or slab the crew expects to find. Most garage and shop shells are standing within days of delivery. A commercial building at 60 feet wide takes more time, given its size and how many doors it has, but it remains days of work rather than months. Mention gates, long driveways and soft ground to the lot ahead of install day.

Tan metal garage with two doors and an open lean-to

Planning a Stokesdale shop or garage before you choose a size

Size and color are where most people start, but a shop that still suits you in ten years is decided earlier. Begin with the site. Choose the highest, best-drained ground that still allows easy access, and check how far the building has to stay from the septic field, the well and the property lines.

Next comes the paperwork. The county inspections office can tell you which permit and which drawings a building of your size needs, so ask them before you order. Then the use: list everything the building will hold over the next five years, counting equipment you have not bought yet.

With those three settled, the rest follows. Leg height should match the tallest thing you will park inside, width and length the amount you need to store, and roof style the volume of leaves and needles that will land on it; rain, leaves and pine needles run off a vertical roof best. Put the doors where the driveway runs, not where they look balanced. Take the list to the lot, or enter it on the quote form, and we will come back with a real number.

Dark green metal building with a roll-up door

Red clay, slopes and weather around Stokesdale

Guilford County’s northwest corner, near Belews Lake, is where Stokesdale sits, and moving west from the coastal plain the sandy ground gives way to red clay. Few lots are level. Properly cut and compacted, clay supports a slab well, yet water runs off it fast, so settle where the runoff will go before anyone grades the pad. If the lot slopes, let us know how much it drops across the footprint; that alters the site work much more than it alters the building.

The weather differs from the coast as well. Hurricanes have generally lost their punch by the time they get here, although in 2024 Helene showed that the foothills and mountains can be hit with a great deal of rain in a single day. Day to day, the concerns are ice, now and then a heavy wet snow, and straight-line winds that blow hard ahead of summer storms. Where a building will stand beneath oaks or pines, a vertical roof is what we usually recommend: it clears snow and leaf litter more readily than a horizontal one does.

Specifications

  • Lot address: 341 Ram Loop Dr, Stokesdale, NC 27357
  • Phone: (336) 575-7451
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm
  • Nearest lots: Mocksville (I-40 West), Sparta (Blue Ridge); full list at /locations/
  • Widths: 12′ to 60′ clear-span
  • Framing: 14-gauge galvanized standard, 12-gauge available
  • Delivery: Free within 100 miles, Greensboro and the Triad included

Common Questions

Where is your Stokesdale lot located?

The lot is at 341 Ram Loop Dr in Stokesdale, NC 27357, in the northwest part of Guilford County, where US 158 crosses NC 68. Phone (336) 575-7451 on a weekday between 9am and 5pm or on Saturday between 9am and 1pm, and the lot will tell you what is on display.

Do you finish the inside of a building?

No. Our work ends with the steel shell, which we manufacture, deliver and install. Your own trades take care of the slab, electrical, plumbing and interior finishing once the shell stands. The only interior option we offer is insulation on the panels.

Can I finance a shop or commercial building, or rent it to own?

Qualifying buildings can be rented to own, with no credit check, and the Stokesdale lot will tell you whether a particular building is eligible. Lenders that serve businesses and equipment buyers also finance steel buildings, so put the question to yours before you order.

Is Greensboro inside your free delivery area?

Yes. Each of Greensboro, High Point, Kernersville and Winston-Salem is no more than 100 miles from the Stokesdale lot, so there is no charge for delivery or installation. The building comes from our Farmville plant, and our own crew assembles it on site.

Will my Stokesdale site need engineered drawings?

Whether certified drawings for wind and snow loads are needed depends on the county and on the size and use of the building, so check with Guilford County. We also confirm before you buy whether certification applies to your site, and we supply the engineered drawings wherever Guilford County asks for them.

Which roof style suits a garage built beside a house in Summerfield?

The usual pick for a garage beside a home is a roof that echoes the line of a conventional house roof; ask the lot which styles come in your building size. Where a homeowners association reviews how buildings look from outside, ask about matching trim and color as well, and read the covenants first, because each subdivision sets its own requirements.

Your Stokesdale quote within 24 hours

Send us the dimensions, your county and what you plan to keep inside. Each price starts from current steel costs and asking commits you to nothing; should a different size work better for you, you will hear it from us.

Request a Quote Design It in 3D