Metal Buildings Washington, NC

Red metal garage with two roll-up doors and a carport lean-to

Washington NC · Beaufort County Steel Buildings

Most of what matters about metal buildings in Washington, NC can be checked before you commit a dollar. The plant is in Farmville, where ECOP forms 29-gauge steel. Our address is 1046 Greenville Blvd SW in Greenville, NC. And any quote we write comes from current steel pricing, with no obligation attached.

These buildings are meant for workshops, storage space and farm jobs. We deliver across Beaufort County, and setup costs nothing within 100 miles. Because we erect the steel ourselves, no separate contractor is needed for it.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No outside contractor

We erect the steel ourselves, so you hire nobody else for it.

Support

Call us

Our number is (252) 414-5105.

Diverse Product Range

Where to find us

East Carolina Outdoor Products is at 1046 Greenville Blvd SW in Greenville, NC 27834.

Regional Focus

Beaufort County, no charge

Delivery is free within 100 miles, which includes Washington, Chocowinity, Belhaven, Vanceboro and Bath.

Diverse Product Range

Clear span to 60′

Wide-open interiors in widths up to 60′.

Quality Assurance

29-gauge panels

That gauge is our standard panel.

money_1

Rent-to-own available

Qualifying buildings need no credit check.

ECOPM35

From plant to finished building, one company

Manufacturing, delivery and setup all come from ECOP. For the steel building you hire nobody else, because we put it up ourselves. Phone (252) 414-5105 to talk it through.

Tan metal garage with two doors and an open lean-to

Metal buildings in Washington, NC, sized to the parcel

A national kit site will not give you a quote that accounts for Washington’s wind exposure or the setbacks along the Pamlico River. Ours is built around the width, length and door package you choose, and it comes out of the Farmville plant where your panels are cut. That applies to a shop beside US 17, a storage building behind Chocowinity or an ag building near Vanceboro.

ECOPM18

A shop, storage, a farm building or a mix

An unobstructed floor gives tractors, trailers and workbenches room to share one building. Lean-tos cover equipment that is waiting its turn, wainscot adds impact resistance, and insulation makes sense if the building will also be a place to work. Wind from the northeast off the Pamlico River is part of the framing choices from the beginning, not an afterthought.

White metal building with open bays, with a truck and equipment trailer nearby

Delivery across Beaufort County

Within 100 miles of Greenville, delivery and setup cost nothing, which covers Chocowinity, Belhaven, Vanceboro and Bath. Dial (252) 414-5105 or come to 1046 Greenville Blvd SW in Greenville. When we write a quote, it includes guidance on Beaufort County permits and wind loads.

Gray barn-style metal garage with two doors and side lean-tos

Metal buildings: what to settle before you pick a size

Buyers usually begin with size and color, but the choices that decide how you feel about the building a decade later come before either. First is the site: look for the highest ground that drains well and still lets a truck get in, then measure the setbacks to your boundary lines, your well and septic field. Second are the rules. Phone the inspections office and find out which permit and which drawings a building your size requires, and whether the parcel lies in a flood zone. Third is the use: list what you expect to keep inside through the next five years, including items you have yet to buy.

After that the decisions are easy. What you store sets the width and length, your tallest item sets the leg height, and the amount of falling debris decides the roof style; a vertical roof handles rain, leaves and pine needles best. Put the doors where the driveway runs rather than where the wall looks balanced.

Carry the list to our lot or type it into the quote form, and you will get an actual price.

ECOPM28

Storms, water and where to set a Washington building

In this part of the state a storm usually means water driven by wind. Both Isabel (2003) and Irene (2011) drove water from the sounds across yards and fields, far inland, so look your parcel up on the flood map before anything else. Close to the shore, the county can tell you if a CAMA permit is needed, since the state’s coastal management rules cover most counties ringing the sounds. Northeast wind off the river is built into our framing options too.

Water shapes the land. Two sounds, the Albemarle and the Pamlico, and four rivers, the Pamlico, the Pasquotank, the Roanoke and the Chowan, frame flat, low-lying farmland. The soil varies from sandy ridges to dark organic ground that soaks up water like a sponge, so pad work earns more here than in nearly any other place we deliver: build it up, compact it and grade it so water runs off.

Little Washington is the local name for the town, set where the Tar River broadens into the Pamlico. The open country leaves room to build, and for decades farms growing peanuts, cotton and soybeans here have relied on wide steel buildings with no posts in the middle.

Specifications

  • Phone: (252) 414-5105
  • Address: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Widths: 12’–60′
  • Lengths: 20’–100’+
  • Panels: 29-gauge
  • Delivery: Free within 100 miles
  • Hours: Mon–Fri 9am–5pm, Sat 9am–1pm

Common Questions

Does ECOP erect the building, or must I hire someone for that?

We erect it ourselves. You will not need a separate builder for the steel, because the same company makes it, hauls it and puts it up. Phone (252) 414-5105.

Where can I buy a metal building near Washington, NC?

From East Carolina Outdoor Products. The Farmville plant forms the steel, and we deliver to Washington and all of Beaufort County, with setup at no charge. Our number is (252) 414-5105.

Will a building near the Pamlico River need extra wind certification?

It may. With northeast winds coming off the Pamlico River and Pamlico Sound, Beaufort County can fall into a higher wind-speed design category. Whenever your inspector requires certified drawings, we supply them.

Do you build farm and equipment buildings around Washington, NC?

Yes. Hay storage, equipment sheds and other ag buildings are standard configurations. Bring the dimensions of your equipment, and the door openings will be sized to match.

Does delivery to Chocowinity or Belhaven cost anything?

No. Both towns lie well inside the 100-mile radius from Greenville, where delivery and setup are free.

Your Washington quote within 24 hours

Send the size, the county and what you plan to store, and we will price it from steel costs as they stand today. Asking puts you under no obligation, and we will also say so if another size would suit your use better.

Request a Quote Design It in 3D