Metal Garages Clinton, NC

White metal building with a new concrete apron

Clinton NC · Metal Garages

A common slip with metal garages in Clinton, NC is choosing the building first and the spot last. The ground in Sampson County is level and sandy over clay, and in a low corner of the yard water can sit for a while once a summer thunderstorm has passed. See where it collects, put the garage elsewhere, and only then decide how big to go.

Once the site is settled, the garage itself is simple: clear-span steel with room for trucks, farm equipment and a workbench. Our Farmville plant roll-forms 29-gauge steel, and we build and install the finished garage ourselves, so you need no separate builder for the steel. Before delivery to Clinton or elsewhere in Sampson County, you can pace out a footprint at our Greenville walk-in lot, 1046 Greenville Blvd SW. Delivery and setup cost nothing within 100 miles, which covers Eastern NC, Eastern SC and Eastern VA. Dollar figures are not posted online, so phone (252) 414-5105 or send in the quote form.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No builder needed

ECOP erects the building itself, which means no outside builder for the steel.

power 2

Made in Farmville

Panels are formed at the Farmville plant, and Greenville does no manufacturing.

Locations

Greenville walk-in lot

Find us at 1046 Greenville Blvd SW.

Support

Call us directly

Phone (252) 414-5105.

delivery truck

No-cost delivery and setup

Included inside 100 miles of any lot or of the plant.

money_1

Rent-to-own available

Buildings that qualify need no credit check.

Customize

Custom metal buildings

Width, height and openings are priced for your site.

Diverse Product Range

Clear-span metal garages

No interior posts, and a price set for your site.

White metal building with open bays, with a truck and trailer alongside

We make it, deliver it and put it up

We make the garage, bring it to Clinton or anywhere else in Sampson County and set it up. The steel building is our job from start to finish, which leaves no builder or contractor for you to hire. Ring (252) 414-5105 to talk it over.

Four-bay metal garage with the doors open

Metal garages sized for a Clinton lot

Choose the width for cars, trucks or farm equipment, then decide where the roll-up openings and walk-in doors should go. A vertical roof package sheds the rain that falls across the coastal plain. Openings and any certification are priced for your site.

The office and display buildings at the East Carolina Outdoor Products lot in Greenville

The Farmville plant, the Greenville lot and your Clinton site

All forming of steel happens at the Farmville plant, not in Greenville. Visitors come to the Greenville lot: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834. Look over a sample there, and we then deliver to Clinton. Our number is (252) 414-5105.

White metal building with a tall RV-height lean-to

Towns around Clinton that get deliveries daily

Every day our deliveries reach Fayetteville, Smithfield, Goldsboro, Mount Olive, Warsaw and Dunn, as well as other Eastern NC towns inside the free delivery range. Kits, stock that is for sale and rent-to-own are all worth raising when you call; the rent-to-own plan involves no credit check on buildings that qualify.

ECOPM40

Stopping condensation from dripping inside a metal garage

Moisture is the problem a garage brochure never mentions. On a humid night warm air fills a closed steel building, the roof panels lose their heat after dark, and the water in that air forms droplets under the roof. By morning it is dripping onto whatever you parked below.

Planning ahead prevents it. Put insulation, or at least a vapor barrier, beneath the roof panels, add vents in the gable ends or along the ridge so damp air can leave, and lay a vapor barrier under a concrete slab to stop ground moisture rising. If the floor falls slightly toward the door, you can wash it out with a hose.

Doors decide whether you actually use the building. Choose a roll-up wide enough for a current pickup, add a separate walk-in door, which saves lifting the big one to get a rake, and place windows on the wall that stays out of the afternoon sun.

Gray metal garage with a carport lean-to on a concrete pad

What sets building in Clinton apart

Sampson County, where Clinton is the county seat, ranks among the biggest farming counties in North Carolina, and the ground helps explain why. It is level, with clay under a layer of sandy loam, and groundwater is shallower than most newcomers expect. Sweet potatoes and tobacco thrive in that. Concrete laid in the lowest part of the lot does not, so after the next heavy summer thunderstorm, see where the water lingers and site the garage somewhere else.

Hurricane Floyd in 1999 and Hurricane Matthew in 2016 were mostly rain by the time they got here, and the Tar and the Neuse ran over their banks for days afterward. Wind counts, but over most of Sampson County what matters is good drainage, a pad that carries rain away, and anchors chosen for the soil. Should a creek or river lie close to your lot, check the county flood map first. A quick look, five minutes at most, can head off trouble with your insurer.

Specifications

  • Plant: Farmville, NC — roll-forming manufacturer
  • Walk-in lot: 1046 Greenville Blvd SW
  • NAP: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Phone: (252) 414-5105
  • Panels: 29-gauge standard, 26-gauge upgrade
  • Widths: 12’–60′ clear span
  • Service: Clinton · Sampson County · Eastern NC
  • Delivery: Free within 100 miles
  • Region: Eastern NC · Eastern SC · Eastern VA

Common Questions

Where can I buy a metal garage in Clinton, NC?

From ECOP. We make the steel in Farmville, show it at our Greenville lots, and deliver and install it in Clinton and throughout Sampson County. Our number is (252) 414-5105.

Will you put the garage up, or do I need to hire a builder?

We put it up. We build and install the steel building ourselves, so there is no builder to hire. Call (252) 414-5105.

Is the Greenville location where the garages are manufactured?

No. Everything is made in Farmville, and the Greenville site only receives walk-in visitors.

What should I budget for a metal garage in Clinton?

Size, height, doors and any certification the site calls for all move the price. Dollar figures are not published online, so phone (252) 414-5105 or send the quote form.

Can a garage be rented to own without a credit check?

It can, for buildings that qualify. Raise it when you phone or when you submit the quote form.

A real price for your Clinton garage in 24 hours

Give us the size you have in mind, your county and what the garage will hold. The price is built on current steel costs and commits you to nothing; should another size suit you better, we will tell you.

Request a Quote Design It in 3D