Metal Shops

Gray metal building with a tall roll-up door

Workshop · Shop Buildings

Humidity is hard on wood framing on the coastal plain, and that is a good argument for a steel workshop. Metal shops suit hobbyists, fabricators and trade contractors across Eastern NC. ECOP workshop buildings are manufactured in Farmville, quoted from our Greenville lots and installed by us, and clear-span bays can be configured as custom metal buildings. Where we install the shop, no builder or other contractor is needed for the steel.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No builder to hire

The steel is built and installed by ECOP. No separate contractor is needed.

Support

Call us

Dial (252) 414-5105.

Locations

Our address

East Carolina Outdoor Products is at 1046 Greenville Blvd SW in Greenville, NC 27834.

power 2

Plant in Farmville

Everything is manufactured in Farmville, NC, and nothing in Greenville.

Diverse Product Range

Steel workshops

A steel workshop is the same thing as a metal shop.

Customize

Custom options

Doors, height, lean-tos and insulation can all be tailored.

Relocated

Installed by ECOP

We erect the shop on your site.

Steel frame of a metal building going up, with a lift on site

One company builds and installs the shop

ECOP handles manufacture, delivery and setup, so there is no builder or contractor to find for the steel itself. The number to call is (252) 414-5105.

Long charcoal metal building with a roll-up door on a freshly graded site

Laying out a metal shop for the work you do

Welders need tall doors and a clear, spark-safe floor. Mechanics want height for a lift and benches down the sides. Woodworkers want bays suited to dust and walk-in doors on the side. Our part is the steel shell. The electrical power, the HVAC and the interior finishing are usually the owner’s to arrange, and we coordinate the openings so the trades that follow can finish the job cleanly. You may also see these buildings sold as metal shop buildings or steel shop buildings.

Empty metal building interior with a sealed concrete floor

Why steel beats wood framing for a workshop

Our frames are galvanized steel, and the 29-gauge panels made in Farmville hold their shape under workshop use, where damp air wears on wood framing. Insulation packages are available if you want the shop comfortable all year.

East Carolina Outdoor Products sales lot and office in Greenville, seen from the air

Get a quote from our Greenville lots

When you call (252) 414-5105, have a list of your tools and vehicles ready, along with your county. To look at examples first, stop by East Carolina Outdoor Products at 1046 Greenville Blvd SW, Greenville, NC 27834.

Inside a large clear-span metal building with both ends open

Heat, air and height in a metal shop

Metal shops are simple to buy and just as simple to get wrong. What decides whether a shop gets used or avoided in July is mostly heat and airflow: a bare steel building in full sun is hot by mid-morning from June through September.

Insulating the roof is the minimum, a light roof color helps, and ridge or gable vents let the hot air out. Where the site allows, roll-up doors on opposite walls give you a cross-breeze whenever you open both. The floor needs forethought too: pour thicker concrete under anything heavy, such as a lift or a machine, and if you want power outlets away from the walls, get conduit into the slab before the pour.

The third decision is wall height. Legs twelve feet tall sound roomy until a mezzanine, tall shelving or a two-post lift enters the plan, and extra height costs the least on the first order and the most once the building is up.

ECOPM32

Permits and sizing for a metal shop in Eastern NC

Paperwork comes first. Before you order, ask your county whether the building you have in mind needs a permit, what drawings it will want to see, and whether any part of your lot lies in a mapped flood zone. When you phone us, include the county with your tools and your vehicle list.

Then settle the size, and take a hint from the landscape. Old wooden tobacco barns still lean in fields along the back roads between Wilson and the coast, tall and narrow because they were made for curing leaf. Steel has taken over from them on farms and in backyards, with wide clear spans, no posts in the middle and roofs that shrug off summer thunderstorms.

What goes inside has changed more than the need for space. One footprint may now hold a side-by-side for deer season, a camper, a bay boat for the Pamlico, or the gear for growing sweet potatoes or peanuts. If you are unsure how big to go, measure the longest thing you own, leave room to walk around it, and add one more bay. Building too small is the regret we hear most.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC (not Greenville)
  • Address: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • Product: Metal shop building
  • Widths: 12’–60′
  • Delivery: Free within 100 miles

Common Questions

Do I have to hire my own builder for a metal shop from ECOP?

No. ECOP manufactures, delivers and sets up the steel building, so there is nothing for a builder to do on the steel. Call (252) 414-5105.

Is the plant in Greenville?

No. The plant is in Farmville, NC, and Greenville has sales lots only. Call (252) 414-5105.

Will ECOP finish the interior of a metal shop?

Our work is the steel shell. The electrical work, finishing the insulation and building the benches are typically separate, and we plan the openings with you.

Can I add a lean-to to a metal shop?

Yes. A lean-to is among the usual add-ons for a custom metal building. Call (252) 414-5105.

Who erects the shop on my property?

ECOP does. We build and install the steel shop, so you do not need a builder for it.

Where are your metal shops made?

In Farmville, NC. You can see our lots at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Price your shop within 24 hours

Tell us how big the shop should be, the county it will stand in and what you will keep inside. We work from current steel prices, there is no obligation, and we will say so if a different size would suit your work better.

Request a Quote Design It in 3D