Pole Barns Myrtle Beach, SC — Horry County / Grand Strand

Long white metal barn with arched openings, seen from the front

Myrtle Beach SC Pole Barns — Steel Metal Buildings

What we sell as pole barns in Myrtle Beach, SC is steel, not wood post-frame. Across Horry County and the Grand Strand, people asking for a pole barn usually want a barn, a shop or a place for farm storage, and our steel metal buildings are made for those jobs. We do not build wood post-frame structures, and we do not offer the carpentry that traditional pole barns involve.

The panels are roll-formed at the Farmville plant, and the Greenville, NC lot is for sales and walk-ins only. Because ECOP builds and installs, there is no separate builder to hire. For a real quote, phone (252) 414-5105.

Call (252) 414-5105

Get a Free Quote
Relocated

Installed by ECOP

We build the steel building and put it up, so no separate contractor is needed.

Diverse Product Range

Steel, not wood posts

People ask for pole barns, but what we build for a barn or shop is steel, with no wood post-frame carpentry involved.

money_1

Real quotes only

Phone (252) 414-5105 and we will price your building. No made-up prices are posted here.

power 2

Farmville plant

Our Farmville, NC plant roll-forms the 29-gauge panels.

Locations

Greenville walk-in lot

East Carolina Outdoor Products is at 1046 Greenville Blvd SW in Greenville, NC 27834.

Regional Focus

Horry County coverage

We quote for Murrells Inlet, Garden City, Surfside Beach, North Myrtle Beach and Myrtle Beach itself.

Customize

Custom metal buildings

Custom metal buildings are available for Myrtle Beach, SC as well.

delivery truck

Free delivery zone

Delivery and setup cost nothing within 100 miles for sites that qualify.

Steel frame of a metal building going up, with a lift on site

Why no builder is needed for a steel barn

We make the steel building, deliver it and install it. That leaves no separate builder to hire and no wood post-frame contractor either. To put it plainly, people say pole barns and what we sell is steel; the carpentry of a traditional pole barn is not what we do. Questions go to (252) 414-5105.

Gray metal building with open bays and a lean-to, seen from the side

Pole barns on the Grand Strand and across Horry County

Someone who wants a pole barn near Myrtle Beach is usually picturing a shop built like a barn, a boat barn, or a building for farm storage, set on a parcel somewhere in Horry County or along the Grand Strand. The sites vary, from Intracoastal lots to contractor yards on the way to North Myrtle Beach and the Murrells Inlet corridors. Wind off the coast and salt in the air make durability a real consideration, and we answer with clear-span steel rather than wood posts and girts. We serve Garden City and Surfside Beach as well, along with Murrells Inlet and North Myrtle Beach.

Red metal barn with lean-tos on both sides

Clear-span steel for barns, boat barns and shops

Our clear-span steel goes up to 60′ wide, so a Myrtle Beach barn layout, a boat barn, equipment storage or a mixed-use shop floor can all be framed without interior posts. Each one is sized to fit the footprint you have in Horry County rather than pulled from a catalog. Humidity on the Grand Strand and coastal wind drive the framing and certification choices, and each is priced for your own parcel. Custom metal buildings in Myrtle Beach, SC are the related product. Ask for a quote on (252) 414-5105; we post no invented prices.

ECOPM53

Plant in Farmville, sales lot in Greenville

Manufacturing stays in Farmville, where the panels are roll-formed. Greenville, NC has a sales lot for walk-ins only. To reach us, phone (252) 414-5105 or go to East Carolina Outdoor Products at 1046 Greenville Blvd SW in Greenville, NC 27834. A buyer in Myrtle Beach who asks for a pole barn receives steel built at our plant instead of a nationally sold wood kit, and our deliveries reach Murrells Inlet, Garden City, Surfside Beach and North Myrtle Beach.

White metal building with open bays, with a truck and equipment trailer nearby

Planning a steel barn around the machines you own

On South Carolina’s coast, farming depends on a line-up of costly machines: trucks, diggers, pickers, planters and sprayers. None of it should sit out in the rain and sun. That is why clear-span steel is the usual choice for a farm building: with no posts down the middle, nothing gets in the way, and the doorway can be made as wide as the biggest implement.

When you size the building, think of the largest machine you have today and the one you may buy next. The measurement people most often wish they had changed is the door: a folded planter or a header may need more opening than the tractor pulling it. For hay, wagons and any implement that only needs a roof overhead, a lean-to left open along one side is a low-cost option.

Animals have different needs. For horses and livestock in this climate, moving air does more good than insulation. Leaving the gables open, adding ridge vents and facing the building into the summer breeze make July and August easier on them, and a light-colored roof reflects part of the heat.

ECOPM28

Soil, drainage and pad height on the Grand Strand

Look at the ground first. Sandy soil lets water drain freely, but the anchors have to be matched to it, so tell us what your lot is made of when you request a quote. Many parcels along this coast fall inside mapped flood zones, so settle the pad height early, before colors or door sizes, and ask for certified drawings at the outset, since the building departments in this area expect them.

Salt air is a constant for metal in Myrtle Beach, which sits at the center of the Grand Strand. Hose the panels down now and then, touch up trim and fasteners when they need it, and choose a roof style that does not hold debris, and the building should look right for decades.

Wind and water both matter along this coast. Design wind speeds here are counted among the strongest in the region. People still use Hugo in 1989 as the measure of a bad storm, and Matthew and Florence made the case that flooding can be as damaging as wind: the Waccamaw was still climbing days after Florence was gone.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: Horry County
  • Nearby: North Myrtle Beach, Surfside Beach, Garden City, Murrells Inlet
  • Product: Steel metal building for barn/shop use (pole-barn search)
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Delivery: Free within 100 miles (qualifying)

Common Questions

Will a pole barn from ECOP need a separate builder in Myrtle Beach?

No. We handle manufacture, delivery and setup of the steel building ourselves, and wood post-frame work is not part of what we do. Questions go to (252) 414-5105.

Are your pole barns built the traditional wood post-frame way?

No. People ask for pole barns, but what we sell is steel for a barn or a shop. Traditional pole-barn carpentry is not something we claim to offer. Phone (252) 414-5105.

Where is the steel for a Myrtle Beach order made?

The Farmville, NC plant makes it. Greenville, NC has only a walk-in lot for sales, with no roll-forming line.

Is Horry County served from the Farmville plant?

Yes. The steel we deliver across Horry County is roll-formed at the Farmville plant. Phone (252) 414-5105.

Will you deliver a steel barn to North Myrtle Beach or Murrells Inlet?

Yes, and we do it regularly, with the steel coming from the Farmville plant, to Murrells Inlet, Garden City, Surfside Beach and North Myrtle Beach. Phone (252) 414-5105.

What does a steel pole barn cost in Myrtle Beach, SC?

The answer depends on the size and height, the roof, the doors, any certification needed, and delivery and installation at your Horry County site. Send us your footprint on (252) 414-5105 and we will give you a real quote.

A quote back in 24 hours

How big does the barn need to be, which county will it stand in, and what will it hold? Give us those answers and we will price it from current steel costs. You are not obliged to buy, and if another size would serve you better we will say so.

Request a Quote Design It in 3D