Pole Barns Washington, NC — Beaufort / Pamlico

White barn-style metal building with black trim and lean-tos

Washington NC Pole Barns — Steel Metal Buildings

The plain fact first: the barns and shops we supply to people searching for pole barns in Washington, NC are steel buildings, not wood. What we sell is a steel metal building meant for barn or shop duty, and wood post-frame carpentry is not part of what we do. This is Washington, North Carolina, in Beaufort County, where the Tar River widens into the Pamlico; locals call it Little Washington. It is not the state of Washington or Washington, D.C. We roll-form the panels in Farmville, our Greenville lot is for walk-in visits, and we build and install the building ourselves, so you do not need a builder. To ask about a price, phone (252) 414-5105; invented figures are not on our site.

Call (252) 414-5105

Get a Free Quote
Diverse Product Range

We do the building

ECOP erects the steel building itself, so you hire no separate contractor.

Diverse Product Range

Steel, not wood framing

People look for pole barns, but our product is a steel metal building for barn or shop use, never wood post-frame carpentry.

money_1

Prices by phone

Ask for a price at (252) 414-5105. Invented prices never appear on our site.

power 2

Made in Farmville

Our 29-gauge panels come off the roll-forming line in Farmville, NC.

Locations

Greenville walk-in lot

Our sales lot is at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Regional Focus

Serving Beaufort County

Our quotes reach Bath, Vanceboro, Belhaven, Chocowinity and Washington.

Customize

Custom metal buildings

Washington, NC customers can ask us about custom metal buildings too.

delivery truck

Free delivery radius

Delivery and setup are free for qualifying sites, up to 100 miles away.

Inside a clear-span metal building showing the steel frame and concrete floor

One company, no post-frame contractor

We manufacture the steel building for your barn or shop in Washington, NC, deliver it and put it up, so no separate builder and no wood post-frame contractor is involved. To be straight about what we are: people search for pole barns, and what we sell is steel; traditional pole-barn carpentry is not our trade. Our number is (252) 414-5105.

White metal building with open bays, with a truck and trailer alongside

Pole barns in Washington: Beaufort County and the Pamlico River

Washington sits in Beaufort County on the Pamlico River, so steel here has to allow for river setbacks, humid coastal air and the wind that reaches Inner Banks sites. We quote what barn buyers in town are looking for, using steel formed in Farmville, and our quotes extend to Chocowinity, Belhaven, Vanceboro and Bath.

ECOPM52

Steel for shops, storage and barn layouts near the Pamlico

A clear span suits workshops, farm storage and hybrid barn layouts alike, and when Beaufort County asks for certification we can supply it. Custom metal buildings in Washington, NC are the related option we quote alongside these. The line to call is (252) 414-5105.

Front of the office at the East Carolina Outdoor Products lot in Greenville

Farmville makes it; Greenville is the sales lot

The plant is in Farmville, and the Greenville lot exists for sales only. You will find it at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834, and the phone is (252) 414-5105. Delivery is free within 100 miles when a site qualifies, which covers Bath, Vanceboro, Belhaven, Chocowinity and Washington itself.

Long white metal barn with arched openings, seen from the front

A steel barn or shop in Washington: what to plan for

Start from what the building has to hold. Farm work here depends on costly machines such as planters, pickers, diggers, sprayers and trucks, and none of it belongs out in the weather. A clear span suits that equipment because nothing stands in the middle of the floor, and the main door can be sized to the widest machine you own.

Allow for the next machine as well as the current ones. The most common regret is a door that is too narrow or too low, so settle the opening before anything else is decided.

Animals call for a different plan. For horses and livestock, moving air matters more than insulation here, so leave the gables open, add vents along the ridge and turn the building to face the summer breeze. A pale roof also takes some heat out of July and August.

Tan barn-style metal building with a boat parked in the center bay

Building in Little Washington, on the Pamlico River

Locals call the town Little Washington, and it stands at the point where the Tar River broadens into the Pamlico. Water shapes this part of North Carolina: the two big sounds, Albemarle and Pamlico, the Chowan, Roanoke and Pasquotank rivers, and low flat farmland spread between them. For a building, the consequences start with the ground. Soils vary from sandy rises to dark organic earth that stays saturated, so a pad that is built up, packed down and sloped to drain is worth a great deal here.

A storm here usually means wind pushing water ashore. In 2003 Isabel, then in 2011 Irene, sent sound water across yards and fields far from the coast, so find your parcel on the flood map. Near the shoreline a CAMA permit may apply, and the county can tell you which; the state’s coastal management rules cover most counties around the sounds. All that open country leaves room to build, and farms growing peanuts, cotton and soybeans have put up wide clear-span steel for decades.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: Beaufort County
  • Nearby: Chocowinity, Belhaven, Vanceboro, Bath
  • Product: Steel metal building for barn/shop use (pole-barn search)
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Delivery: Free within 100 miles (qualifying)

Common Questions

Do I have to hire someone to build a pole barn in Washington, NC?

Not for the steel building itself, since we manufacture it, deliver it and set it up. We are not wood post-frame general contractors, though.

Is a pole barn from ECOP built the old way, with wood posts?

No. People ask for pole barns, but our product is a steel metal building for barn or shop use, and wood post-frame carpentry is not something we sell.

Which plant makes the steel for Washington orders?

Our plant in Farmville, NC. The Greenville lot is for walk-in visits and has no roll-forming line.

Are you talking about Washington, North Carolina, and not Washington state or D.C.?

Yes: Washington, North Carolina, in Beaufort County, where the Tar River widens into the Pamlico. Locals call it Little Washington.

Can you bring a building anywhere in Beaufort County?

To qualifying sites inside our free-delivery radius, yes. Phone (252) 414-5105 and we will check yours.

What will a steel barn or shop cost me in Washington, NC?

Certification, doors, roof style, height and size all move the price, as do delivery and installation to your Beaufort County site. Give us your footprint at (252) 414-5105 and we will quote a real number.

A Washington quote within 24 hours

Let us know the size, the county and what the building will hold. We base our figure on current steel pricing, it commits you to nothing, and if another size would work better we will tell you.

Request a Quote Design It in 3D