Pole Barns Wilmington, NC — New Hanover / Cape Fear

ECOPM14

Wilmington NC Pole Barns — Steel Metal Buildings

If you are shopping for pole barns in Wilmington, NC, start with what you can verify yourself. The panels come out of our roll-forming line in Farmville. Greenville has a sales lot where visitors can walk in, at 1046 Greenville Blvd SW, and nothing is made there. The price comes from a real quote when you call (252) 414-5105, not from a figure we invented for this page. For the Cape Fear coast and the rest of New Hanover County, what we sell is steel, in the form of buildings meant for barn and shop use, erected by our own people, which means no builder is needed. Wood post-frame carpentry is not part of what we do.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No builder to hire

We build and install the steel building ourselves, which leaves no separate contractor to find.

Diverse Product Range

Steel, not wood post-frame

Many people search for pole barns. What we sell is a steel building for barn or shop use, and we do not do wood post-frame carpentry.

Support

Quotes by phone

Reach us at (252) 414-5105. We do not publish prices we have invented; a quote is how you get a real number.

power 2

Panels made in Farmville

Our 29-gauge steel panels come off the roll-forming line at the Farmville, NC plant.

Locations

Greenville walk-in lot

You will find us at 1046 Greenville Blvd SW, Greenville, NC 27834, where East Carolina Outdoor Products welcomes walk-in visitors.

Regional Focus

Serving New Hanover County

Our quotes cover Wilmington and also the Porters Neck area, Castle Hayne, Carolina Beach and Leland.

Customize

Custom metal buildings

Custom metal buildings for Wilmington sites are a related option.

delivery truck

Free delivery range

Delivery and setup cost nothing extra for qualifying sites within 100 miles.

Tan metal garage with two roll-up doors and side lean-tos

One company from plant to finished building

In Wilmington, NC, we make the steel building for barn or shop use and take it from there: delivery and setup are ours too. You need neither a separate builder nor a wood post-frame contractor. Plenty of people search for pole barns; what we supply is steel rather than traditional pole-barn carpentry. Our phone number is (252) 414-5105.

White metal building with open bays, with a truck and equipment trailer nearby

Pole barns in Wilmington: coastal wind, salt air and New Hanover permits

Parcels in and around Wilmington have to deal with coastal wind, humid salt air and New Hanover County permit requirements that charts written for inland wood kits do not cover. We quote steel made in Farmville, and the quote includes certified drawings when the county asks for them. Quotes also go out to the Porters Neck area, Castle Hayne, Carolina Beach and Leland.

Tan barn-style metal building with a boat parked in the center bay

Steel sized for boats, trucks and shop work on the coast

The clear-span interior is sized to take a boat on its trailer, a lifted truck, a coastal workshop where the air stays humid, or barn-style storage. We recommend a vertical roof to handle Cape Fear rain. Custom metal buildings are a related option for Wilmington. For a price, call (252) 414-5105.

Front of the office at the East Carolina Outdoor Products lot in Greenville

Plant in Farmville, sales lot in Greenville

Roll-forming happens at the Farmville plant, while the Greenville lot takes walk-ins and sells, nothing else. The sales lot of East Carolina Outdoor Products is at 1046 Greenville Blvd SW, Greenville, NC 27834, and the phone is (252) 414-5105. Ask about the delivery distance to your New Hanover County address, because qualifying sites within 100 miles are delivered free.

Gray metal building with open bays and a lean-to, seen from the side

Planning a pole barn around machinery and livestock

Start from the machinery. Tractors, sprayers, planters and the harvesting gear that Eastern North Carolina farms rely on cost too much to sit in the rain, and so do the trucks that serve them. A clear span suits all of it: with no posts inside, nothing needs steering around, and the door can be cut as wide as the biggest implement demands.

Measure for the biggest machine you own today and for the one you are likely to buy after it. Doors cause the most regret: a header, or a planter in its folded position, can need a wider and taller opening than the tractor towing it. Anything that only needs a roof overhead, such as hay, wagons or implements, can sit under an open lean-to down one side, a low-cost way to cover it.

In this climate, what keeps horses and livestock comfortable is airflow, not insulation. Leave the gables open, vent the ridge and aim the building at the summer breeze, and the animals will get through the heat of July and August without trouble. A pale roof also helps.

ECOPM53

Permits, flood maps and coastal wind in Wilmington

Paperwork comes first on the Wilmington coast. Have certified drawings made at the start, because the inspections office of New Hanover County will ask to see them and your insurer may as well. Then find your parcel on the flood map. A parcel inside a mapped flood zone puts extra weight on two things, the height of the pad and the anchoring, which deserve the same attention as the building. Close to the water you may also need a CAMA permit in addition to the county’s.

Florence came ashore in 2018 at Wrightsville Beach, a short distance east of Wilmington, a port city on the Cape Fear River. Rain fell for days, and a surge then carried river water into neighborhoods with no history of flooding, which is why people here still judge other storms against it. Design wind speeds also rise toward the ocean and the sounds. Requirements for the frame, its anchoring and its certification that an inland site might never face often apply here. Salt air does its damage slowly. Rinse the panels now and then and touch up fasteners and trim, and the building should outlast most of what you store in it.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: New Hanover County
  • Nearby: Leland, Carolina Beach, Castle Hayne, Porters Neck area
  • Product: Steel metal building for barn/shop use (pole-barn search)
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Delivery: Free within 100 miles (qualifying)

Common Questions

Will I have to hire my own contractor for pole barns in Wilmington, NC?

No. We manufacture, deliver and set up the steel building, so a builder is not required, and wood post-frame crews play no part. Phone (252) 414-5105.

Are your pole barns built the traditional wood post-frame way?

No. Pole barn is a name many people search under, but we sell steel buildings for barn and shop use and make no claim to traditional pole-barn carpentry. Phone (252) 414-5105.

Which plant makes the steel for Wilmington orders?

The one in Farmville, NC. Greenville is a sales lot that takes walk-ins; the roll-forming equipment is not there.

Do barn-style steel buildings in Wilmington need drawings for coastal wind?

Often, yes, when the building is permanent. We supply engineered drawings whenever New Hanover County asks for them. Phone (252) 414-5105.

Is Wilmington too far from Farmville for free delivery?

Free delivery applies within 100 miles, so send us your address and we will check whether it qualifies. Phone (252) 414-5105.

What should I budget for pole barns in Wilmington, NC?

Several things set the price: footprint, height, roof style, doors, any certification, and what delivery and installation involve at your site in New Hanover County. Call (252) 414-5105 and give us your dimensions, and you will get a real quote.

Your Wilmington quote within 24 hours

Send the dimensions, the location and what you intend to keep in the building. The figure follows current steel pricing and comes with no obligation, and we will point out a different size if it would suit you better.

Request a Quote Design It in 3D