Steel Buildings Greenville, NC — Pitt County (not SC)

White metal garage with black trim and two roll-up doors

Greenville NC Steel Buildings — Pitt County

Start with what the building has to hold or protect: a barn, a garage, a shop or general storage. If it is going up in Greenville, North Carolina, we can help, because we serve Pitt County and steel buildings in Greenville, NC are our work. Greenville, South Carolina is not part of our area. The steel is formed on our roll-forming line in Farmville, and the Greenville location on Greenville Blvd SW is a sales lot for walk-ins only. We build and install, so no separate builder is needed. For a real quote, call (252) 414-5105.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No separate builder

We do the building and the installing, so the steel needs no second contractor.

Support

Quotes by phone

Call (252) 414-5105. You get a real quote for your site, not a posted price.

power 2

Roll-formed in Farmville

Our 29-gauge panels are formed at the plant in Farmville, NC.

Locations

Greenville sales lot

East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Regional Focus

Pitt County towns

We quote for Greenville, Winterville, Ayden, Farmville, Grimesland and Simpson.

Customize

Custom metal buildings

For engineered drawings, lean-tos or openings, see custom metal buildings in Greenville.

Diverse Product Range

Clear span up to 60′

An open floor with no posts, suited to a workshop, garage, barn or storage.

delivery truck

Free delivery zone

Qualifying sites within 100 miles have delivery and setup included.

Four-bay metal garage with the doors open

One company handles the steel from start to finish

Manufacturing, delivery and installation are all ours. A steel building for your Greenville site needs no second builder or contractor on the job. Questions go to (252) 414-5105.

White metal garage with cars parked in three open bays

Steel buildings in Greenville and Pitt County, not South Carolina

Greenville is in Pitt County, on the coastal plain of Eastern NC, and that is where we work: parcels around ECU, the Winterville and Ayden corridors, and sites only a short haul from Farmville. Greenville, South Carolina is outside our area. Visit the Greenville sales lot to walk through framing samples, then schedule delivery of the steel anywhere in Pitt County. Nearby towns we routinely serve include Ayden, Winterville, Grimesland, Simpson and Farmville.

Gray metal building with a tall roll-up door

Shops, garages and storage built to your footprint

Clear-span steel buildings reach 60′ wide, so a shop, an enclosed garage or a storage building can have a floor with no posts in it. Each is sized to the footprint you give us rather than picked from a catalog. Coastal plain humidity and the wind from tropical systems shape the framing and certification choices, and we price those for your parcel in Pitt County. Custom metal buildings in Greenville are the related option when the job calls for engineered drawings, lean-tos or openings.

Tan metal garage with lean-tos on both sides

Roll-forming in Farmville, walk-ins in Greenville

Nothing is manufactured at the Greenville lot, which handles walk-in sales only; the roll-forming happens in Farmville. Phone (252) 414-5105 or stop by East Carolina Outdoor Products at 1046 Greenville Blvd SW, Greenville, NC 27834. Steel buildings for Greenville buyers ship from our plant instead of arriving from a warehouse that sends kits nationwide.

Gray metal garage with a carport lean-to on a concrete pad

Planning a steel building in Greenville before you pick a size

Color and size get most of the attention, but three questions asked earlier determine whether you are still happy with the building a decade from now. Where will it stand? Choose high ground that drains well and is still easy to reach, and measure the setbacks from the property lines, the well and the septic field. What does the county require? Phone the county inspections office to learn which permit your project needs and which drawings it must come with. What will it hold? Make a list that looks five years ahead, and include anything you have not bought yet.

Once you have those answers, the choices that remain are simple. Length and width come from what you will store, leg height from the tallest thing going in, and roof style from the debris that will land on it: a vertical roof clears rain, leaves and pine needles best. Place the doors by the driveway, not for symmetry. Take your list to the lot or send it in with the quote form, and we can give you a real number.

White metal building with three overhead doors and a timber-framed entry

Greenville and Pitt County: paperwork first, then the pad

Deal with the paperwork before anything is built. In Pitt County that means asking the inspections office what your building needs and looking up the county flood map for your parcel, which matters most if a creek or river is close. Greenville grew up along the Tar River, and longtime residents recall how far Hurricane Floyd drove it out of its banks in 1999. Floyd and Matthew in 2016 both reached Pitt County as rainstorms, and the Neuse and the Tar both stayed over their banks for days. Checking the flood map takes about five minutes.

Then look at the ground. Underfoot, a sandy loam lies over clay on level land, and the water table is shallower than most newcomers expect: good news for tobacco and sweet potatoes, bad news for a slab in the lowest corner of the yard. Notice where water stands after a hard summer thunderstorm and build elsewhere. Wind matters as well, but for most Pitt County lots the real work is in drainage, a pad that carries water away, and anchors that match the soil.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: Pitt County
  • Nearby: Winterville, Ayden, Farmville, Grimesland, Simpson
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Roof styles: Regular, A-frame boxed eave, vertical
  • Delivery: Free within 100 miles (qualifying)

Common Questions

Does ordering from you mean hiring a builder as well?

No. We handle the building and the installing, which leaves nothing in the steel work for another contractor. To discuss your project, call (252) 414-5105.

Do you work in Greenville, North Carolina or Greenville, South Carolina?

In Greenville, North Carolina, in Pitt County. Greenville, South Carolina is not part of our area. For a Pitt County quote, call (252) 414-5105.

Where does the steel for a Greenville order come from?

From our Farmville, NC plant. Greenville only has the walk-in sales lot; there is no roll-forming line on that site.

Is there a place in Greenville where I can look at a steel building first?

Yes. The walk-in lot is at 1046 Greenville Blvd SW. It sells only, and manufacturing stays in Farmville. Call (252) 414-5105.

What should I expect to pay for a steel building in Pitt County?

Size, height, roof style, doors, certification, and delivery and installation at your Pitt County site all affect the price. Send your footprint when you call (252) 414-5105 and we will put a real figure on it.

A Pitt County quote in 24 hours

Give us the rough size, the county and what will be stored inside. The quote reflects steel prices as they are today, it carries no obligation, and if a different size would do the job better, we will point it out.

Request a Quote Design It in 3D