Steel Buildings Myrtle Beach, SC — Horry County / Grand Strand

ECOPM30

Myrtle Beach SC Steel Buildings — Horry County / Grand Strand

Start with what has to stay under cover: a boat, a shop, a garage, the gear for a farm. Steel buildings in Myrtle Beach, SC are what we make for those jobs, and ECOP serves Horry County and the Grand Strand with clear-span steel, for shops, for storage and for farm layouts.

Our Farmville plant roll-forms the steel, and the Greenville, NC lot is for walk-in visits only. We erect the building ourselves, so you do not hire a builder. For a real quote, call (252) 414-5105.

Call (252) 414-5105

Get a Free Quote
Reputation and Trust

No builder to hire

We make the building and put it up ourselves, so the steel needs no outside contractor.

Support

Quotes by phone

We do not list invented prices. Call (252) 414-5105 and we will quote your building.

power 2

Panels made in Farmville

We roll-form 29-gauge panels at our plant in Farmville, NC.

Locations

A walk-in lot in Greenville

East Carolina Outdoor Products sells from 1046 Greenville Blvd SW, Greenville, NC 27834.

Support

Quoted for Horry County

We price buildings for Garden City, Murrells Inlet, Surfside Beach, North Myrtle Beach and Myrtle Beach itself.

Customize

Custom building options

Ask about custom metal buildings in Myrtle Beach, SC if your site needs engineered drawings, lean-tos or extra openings.

Diverse Product Range

Clear span up to 60′

No posts inside, so a barn, garage, shop or storage building keeps an open floor.

delivery truck

Delivery and setup included

Both come with the price within 100 miles, for sites that qualify.

Steel frame of a metal building going up, with a lift on site

No separate builder from start to finish

From the plant floor to your pad, the work stays with us. We manufacture the steel building, bring it to your Myrtle Beach, SC site and erect it, and there is nobody else to hire for the steel. Call (252) 414-5105 to start.

Tan metal garage with lean-tos on both sides

Steel buildings for the Grand Strand and Horry County

Sites around Myrtle Beach are not all alike. There are parcels along the Intracoastal, shops in the beach towns and contractor yards on the road toward Murrells Inlet and North Myrtle Beach. What they share is coastal wind and salt air, and a building here should be planned around both, not copied from a national kit listing. The steel comes from our Farmville plant, and we routinely serve all of those towns, along with Surfside Beach and Garden City.

Long white metal barn with arched openings, seen from the front

Shops, boat barns and storage to fit your Horry County site

We size our clear-span steel buildings, up to 60′ wide, to the footprint you have: a shop, a boat barn, an enclosed garage or plain storage. Humidity and coastal wind on the Grand Strand shape the framing and the certification a building needs, and we quote both for your parcel. If you need engineered drawings, lean-tos or extra openings, ask about custom metal buildings in Myrtle Beach, SC.

White metal garage with cars parked in three open bays

Where the steel is made and where you can visit

Roll-forming happens at our Farmville plant, and nothing is manufactured at the Greenville, NC lot, which takes walk-in visitors. You can reach us at (252) 414-5105, or visit 1046 Greenville Blvd SW, Greenville, NC 27834, the address of East Carolina Outdoor Products. A steel building bought for Myrtle Beach ships from the plant rather than from a warehouse of national kits, and delivery reaches Garden City, Surfside Beach, North Myrtle Beach and Murrells Inlet.

White metal building with a new concrete apron

What to settle before you order a steel building here

Size and color usually get decided first, though the decisions that determine whether you will still be pleased with the building a decade later come before either. One is the site itself. Pick the highest, best-drained spot that is still easy to get to, and measure the setbacks from your boundary, your well and your septic field.

Another is the rulebook. Phone the local inspections office and ask which permit and set of drawings a building of your size needs, and whether the lot sits in a flood zone. The third is use: list what the building will hold now and what it might hold over the next five years, even items you do not own yet.

With those settled, the design nearly writes itself. Width and length come from what you store, and leg height from your tallest item. Roof style depends on how much debris will land on it, and against pine needles, leaves and rain a vertical roof does the best job. Send your list with a quote request, or bring it to our Greenville lot, and we will come back with a real price.

Red metal garage with two large roll-up doors on a concrete slab

Siting a steel building on Grand Strand ground

Look at the ground before anything else. The sandy soil along this coast drains well, but it still calls for properly chosen anchors, and a good many parcels fall inside mapped flood zones. Decide where the pad goes, and how high to build it, with both facts in mind, and describe your soil in the quote request so we can match the anchors to it.

Wind and water come next. Design wind speeds on this coast sit near the top of the regional range, and building departments here expect certified drawings, so ask for them at the start. Locals still use Hugo in 1989 as the yardstick for storms, though Matthew and Florence showed that rising water can be as destructive as wind. Days after Florence had gone, the Waccamaw was still climbing.

Day to day, the main wear comes from salt air. Rinsing the panels, touching up trim and fasteners, and picking a roof style that lets debris slide off will keep a steel building in Myrtle Beach looking good for decades.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: Horry County
  • Nearby: North Myrtle Beach, Surfside Beach, Garden City, Murrells Inlet
  • Widths: 12′ — 60′ clear span
  • Lengths: 20′ — 100’+ in 5′ increments
  • Leg heights: 6′ — 20′
  • Roof styles: Regular, A-frame boxed eave, vertical
  • Delivery: Free within 100 miles (qualifying)

Common Questions

If I order from ECOP, do I still need to hire a builder in Myrtle Beach?

No. ECOP handles the manufacturing, the delivery and the setup of the steel building, start to finish. You can reach us at (252) 414-5105.

Is Horry County part of the area you serve from the Farmville plant?

Yes. Our Farmville, NC plant roll-forms the steel, and we deliver it throughout Horry County. To talk through your site, call (252) 414-5105.

Where does the steel for a Myrtle Beach order get made?

At our plant in Farmville, NC. The Greenville, NC lot has no roll-forming line; it exists for sales and walk-in visits.

Can I see a steel building in person before I buy?

Yes. Our sales lot in Greenville, NC takes walk-in visitors. Manufacturing happens in Farmville, so the Greenville lot is for looking and buying only.

Will you deliver a steel building to Murrells Inlet or North Myrtle Beach?

Yes. From the Farmville plant we regularly deliver to those two towns as well as Surfside Beach and Garden City. Call (252) 414-5105 to ask about your address.

How much does a steel building cost in Myrtle Beach, SC?

The price depends on the size, the height, the roof, the doors, any certification needed, and delivery and installation to your Horry County site. Tell us your footprint at (252) 414-5105 and we will quote a real figure.

Your Horry County quote within 24 hours

Give us three details: how big the building should be, which county it will stand in and what it has to hold. We work from current steel pricing, asking puts you under no obligation, and if what you plan to store suggests another size, we will tell you.

Request a Quote Design It in 3D