Steel Buildings Wilmington, NC — New Hanover / Cape Fear

White metal garage with cars parked in three open bays

Wilmington NC Steel Buildings — Cape Fear

Here is what you can check about steel buildings in Wilmington, NC. The panels are roll-formed at our plant in Farmville, and the Greenville sales lot welcomes walk-in visitors. Call (252) 414-5105 and we will quote your own building; our crew builds and installs it, so the steel needs no separate builder. We quote for New Hanover County and the Cape Fear and US 17 corridor, and prices stay off this page because every building is quoted individually.

Call (252) 414-5105

Get a Free Quote
Relocated

Built and installed by us

One company makes, delivers and sets up the building, so no builder is needed for the steel.

Support

Quotes by phone

Call (252) 414-5105. We would rather price your building than post a number that means nothing.

power 2

Panels from Farmville

Our 29-gauge panels are roll-formed at the plant in Farmville, NC.

Locations

Greenville walk-in lot

Find us at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834.

Regional Focus

New Hanover County and nearby

Quotes cover Wilmington, Leland, Carolina Beach, Castle Hayne and the Porters Neck area.

Customize

Custom metal buildings

Custom metal buildings in Wilmington, NC have a related page of their own.

Diverse Product Range

No posts up to 60 feet

A clear span leaves the floor open for a shop, garage, barn or storage.

delivery truck

Free delivery inside 100 miles

Qualifying sites get delivery and setup at no charge within that distance.

Steel frame of a metal building going up, with a lift on site

Why there is no builder to hire

We make your Wilmington building, bring it to your site and put it up. Since all three steps are ours, the steel itself needs no separate builder or contractor. Questions are welcome at (252) 414-5105.

Red metal garage with two large roll-up doors on a concrete slab

Steel buildings for New Hanover wind and Cape Fear weather

Coastal wind, humid salt air and the permit expectations of New Hanover County all come with a Wilmington parcel, and charts written for inland kits skip over them. From Farmville we quote steel buildings in Wilmington with certified drawings whenever the county asks, and we quote in Leland, Carolina Beach, Castle Hayne and the Porters Neck area too.

Tan barn-style metal building with a boat parked in the center bay

Coastal steel for boats, trucks and workshops

We size clear-span steel for boat trailers, lifted trucks and the humid coastal workshop. For the rain along the Cape Fear, we recommend vertical roofs. Custom metal buildings in Wilmington, NC are covered on a related page. To ask for a quote, call (252) 414-5105.

Gray metal garage with an attached carport

Where the steel is made and where it is sold

Roll-forming is done at the plant in Farmville. Sales happen in Greenville, at East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834, and the number for both is (252) 414-5105. Tell us your New Hanover County address and we will say how far it is for delivery; it is free for qualifying sites within 100 miles.

White metal garage with three roll-up doors

Planning a Wilmington steel building before you call

Do the thinking in this order. First the lot: high, well-drained ground that a truck can still reach, with room between the building and your boundary, well and septic field. Then the paperwork: call the inspections office to learn which permit and drawings your building needs, and whether your parcel sits in a flood zone. Then the contents: a list of what will live inside five years from now, including items you have not bought.

Size follows from that list. What you store sets the width and length, the tallest item sets the leg height, and falling debris sets the roof; here a vertical roof copes best with leaves, pine needles and Cape Fear rain. Put the real height of any boat trailer or lifted truck on that list. Doors go where the driveway runs. Then send the list in with the quote form and we will answer with a real number.

ECOPM54

Building near the Cape Fear River in Wilmington

Wilmington is a port on the Cape Fear River. Hurricane Florence came ashore just east of the city, at Wrightsville Beach, in 2018, and it is still the yardstick people use here. Near the ocean and the sounds a building is designed for stronger winds than it would be inland, so framing, anchoring and certification that a buyer a hundred miles away can treat as options are frequently required. Ask us for certified drawings at the start. The New Hanover County inspections office will expect them, and your insurer may want to see them too.

Florence brought days of rain, then a surge that sent river water into streets that had never seen floodwater. If your lot lies in a mapped flood zone, how high the pad stands and how the building is anchored count for as much as the building does, and close to the water a CAMA permit can be required as well as the county’s. Salt air is the patient enemy. Hose the panels down twice a year or so, touch up fasteners and trim, and a metal building should outlast most things you will park in it.

Specifications

  • Phone: (252) 414-5105
  • Plant: Farmville, NC roll-forming
  • Sales lots: East Carolina Outdoor Products, 1046 Greenville Blvd SW, Greenville, NC 27834
  • County: New Hanover County
  • Nearby: Leland, Carolina Beach, Castle Hayne, Porters Neck area
  • Widths: 12′ – 60′ clear span
  • Lengths: 20′ – 100’+ in 5′ increments
  • Leg heights: 6′ – 20′
  • Roof styles: Regular, A-frame boxed eave, vertical
  • Delivery: Free within 100 miles (qualifying)

Common Questions

Will I need a contractor of my own for a steel building in Wilmington, NC?

Not for the steel. We manufacture the building, deliver it and put it up. Call (252) 414-5105.

Will New Hanover County want coastal wind drawings for my building?

Often, for a permanent building. When the county asks, we supply engineered drawings. Call (252) 414-5105.

Where do the panels for a Wilmington order come from?

Our Farmville, NC plant. The Greenville lot is for walk-in sales and has no roll-forming line.

Does Wilmington fall inside your free delivery distance?

That depends on your address. Qualifying sites within 100 miles get delivery and setup at no charge, so call (252) 414-5105 with your New Hanover County address and we will confirm.

What will a steel building cost me in Wilmington, NC?

It depends on size, height, roof, doors, certification, and delivery and installation to your New Hanover County site. Call (252) 414-5105 with your footprint and the quote you get will be a real one.

Wilmington quotes inside 24 hours

Send the footprint you are considering, the county and what the building will shelter. Our figure comes from what steel costs today. There is no obligation to buy, and when another size would serve you better, you will hear that from us first.

Request a Quote Design It in 3D